Bộ hiển thị cầm tay và lưu trữ dữ liệu (Datalogger) cho cảm biến đo Momen, Lực, Load Cell, Strain Gauge Lorenz GM80

Chia sẻ:
Mã sản phẩm: GM80
Thương hiệu: Lorenz Messtechnik
Tình trạng: Còn hàng

Measuring Amplifier with Data Logger

Liên hệ
Mô tả

Bộ hiển thị cầm tay và lưu trữ dữ liệu (Datalogger) cho cảm biến đo Momen, Lực, Load Cell, Strain Gauge Lorenz GM80

The measuring amplifier can process sensor strain gauge (SG) signals of ±3.3 mV/V and active signals of ±10V and 0/4 ... 20 mA.

The measuring amplifier can be used mobile by battery or accumulator operation, but can also be supplied with an external main adapter.

A high measuring accuracy combined with fast measuring rates is ensured by the employment of highly precise amplifiers and components, 16 bit A/D converters and a fast microcontroller.

A versatile configurable data logger stores a series of measurements with date and up to 15288 measured values.

Measured values or logging values can be expelled to a computer or printer via the USB or RS232 interface.

Ten parameter sets are available for sensors. Therein, in each case, the calibration data, the sensor designation and physical unit are deposited.

Functions such as tare, fetch min./max. and delete min./max. are available during the measurement.

The data logger or the interface can be controlled externally via an additional trigger input.
At low measuring rates, the strain gauge supply is clocked power-saving. If the GM80 is not in measuring mode, the device shuts off after three minutes.

  • Data logger up to 15000 measured values
  • Trigger input for external control
  • For active or passive sensors
  • Fast measurement up to 1000/s
  • Mains, battery and accumulator operations
  • Display of the physical unit
  • 10 sensor parameter sets
  • RS232 interface
  • Min./max. storage
  • USB interface
Type: GM80
Technical Details: Measuring Amplifier with Data Logger for over 15000 Measured Values for Active and Passive Sensors, USB-Interface, RS 232-Interface, 10 Sensor Parameter Sets, Fast Measurement of up to 1000/s, Mains-Independent and with freely available Configuration and Evaluation Software GM80-VS2.
Software and Driver Download
Suitable Connection Cable
(PDF Datasheet):

Connection cable for passive sensors, 3 m, with 5-pin female cable connector and 15‑pin D‑SUB- male cable connector
Connection cable for passive sensors, 3 m, with 7-pin female cable connector and 15‑pin D‑SUB- male cable connector
Connection cable for passive sensors, 3 m, with 6-pin female cable connector and 15‑pin D‑SUB- male cable connector
Connection cable for passive sensors, 3 m, with 12-pin female cable connector and 15‑pin D‑SUB- male cable connector
Connection cable for active sensors, 3 m, with 8-pin female cable connector and 15‑pin D‑SUB- male cable connector
Connection cable for active sensors, 3 m, with 12-pin female cable connector and 15‑pin D‑SUB- male cable connector

PDF Datasheet: 081021_GM80_en.pdf
PDF Operation Manual: 090162q_gm80_en.pdf
Đăng nhập
Đăng ký
Hotline: 0904251826
x