Bộ chuyển đổi USB sang DB9 Pin (Male) RS-232 Campbell Scientific 17394

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng

Liên hệ

17394 Converter, USB to DB9 Pin (Male) RS-232

THÔNG TIN SẢN PHẨM

Overview

The 17394 is a six-foot interface cable fitted with a USB connector on one end and a 9-pin pin (male) RS-232 connector on the other end. The USB connector attaches to the USB port of a PC. The RS-232 connector attaches to the RS-232 port of a data logger or peripheral, such as an MD485 Multidrop Modem or RF401-series Spread-Spectrum Radio. Alternatively, the RS-232 connector can attach to an SC32B interface, which attaches to the CS I/O port of a data logger via the SC12 cable.

Benefits and Features

Detailed Description

Cables that shipped after February 20, 2013 use the FTDI chip set and are all black in appearance. Drivers are on a disk shipped with the cable.
Cables that shipped before February 20, 2013 use the Prolific chip set and have a clear and metallic appearance. Drivers are downloadable from the Downloads section.

Specifications

Cable Diameter	4 mm (0.2 in.)
Cable Length	2 m (6 ft)
Dimensions	6.6 x 4.0 x 2.3 cm (2.75 x 1.7 x 0.9 in.) for 9-pin connector 5.5 x 1.6 x 0.9 cm (2.17 x 0.7 x 0.4 in.) for USB connector
Weight	73 g (2.6 oz)

Tài liệu

USB to Serial Driver (FTDI Chip Set) v.2.12.36.4 (2.15 MB) 07-08-2021

This driver is for the CB-FTDI USB to Serial cable (CSI Part# 17394 - Black Cable). Support is for Windows XP/Vista/7/8/10/11 32 & 64 bit. This driver is not compatible with the SC-USB Interface.

Note: Install the driver before plugging the cable into your computer. Once the driver has been installed, plug the cable into the computer to finish the installation Download Now

Retired - USB to Serial Driver (Prolific Chip Set) (7.98 MB) 09-21-2012

This driver is for the SBT-USC6K USB to Serial cable (CSI Part# 17394 - Silver Cable). Support is for Windows XP/Vista/7. This driver is not compatible with Windows 8 and above or the SC-USB Interface.

Note: Install the driver before plugging the cable into your computer. Once the driver has been installed, plug the cable into the computer to finish the installation Download Now

Bộ chuyển đổi USB sang DB9 Pin (Male) RS-232 Campbell Scientific 17394

USB to Serial Driver (FTDI Chip Set) v.2.12.36.4 (2.15 MB) 07-08-2021

Retired - USB to Serial Driver (Prolific Chip Set) (7.98 MB) 09-21-2012

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng