Module 2 cổng Ethernet Modbus TCP & MQTT 16 kênh DO ICP DAS ET-2242U CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Ethernet I/O Module with 16-ch Sink/Source-type DO

THÔNG TIN SẢN PHẨM

Features

Built-in Web Server
Support Modbus TCP/UDP Protocols
Powerful 32-bit MCU Handles Efficient Network Traffic
2-port Ethernet Switch (LAN Bypass) for Daisy-Chain Wiring
Dual Watchdog
I/O Pair Connection (Push and Polling)
Supports web configuration and firmware update via Ethernet
Built-in DO
- ET-2242: 16 sink-type digital output channels
- ET-2242U: 16-ch digital output selectable as either sink- or source-type via wire connection
LED Display to Indicate the I/O status
Wide Operating Temperature Range: -25 ~ +75 °C

Introduction

Providing various digital I/O functions, the ET-2242/2242U module is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the ET-2242/2242U module perfect integration with the HMI, SCADA, PLC and other software systems.

The ET-2242 provides 16 Sink-type Digital Output channels and each channel can drive 650 mA load, while ET-2242U provides 16 sink- or source-type Digital Output channels by wire connection and each channel can drive 500 mA load. There are configurable power-on and safe values for Digital Output. With 2 Ethernet ports, the ET-2242/2242U allows daisy chain connection which permits the flexibility in locating devices, eases installation and lowers infrastructure costs. It features 8 kV ESD protection, 4 kV EFT protection, 3 kV surge and 3000 VDC I/O isolation are also provided to enhance noise protection capabilities in industrial environments.

The module can be used to create DI to DO pair-connect through the Ethernet. After configuration, the ET-2242/2242U module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to the remote DO devices.

It is equipped with removable terminal block connector for easy and robust wiring in industrial situations, and features a powerful 32-bit ARM MCU to handle efficient network trafficking.

Specification

CPU Module
CPU	32-bit ARM
Watchdog Timer	Yes, Module, Communication (Programmable)

EMS Protection
EFT (IEC 61000-4-4)	±4 kV for Power Line
ESD (IEC 61000-4-2)	±8 kV Contact for Each Terminal and ±15 kV Air for Random Point
Surge (IEC 61000-4-5)	±2 kV for Power Line

LED Indicators
Status	1 x Power and Communication 1 x Ethernet 16 x I/O

Digital Output
Channels	16
Type	Push-Pull
Sink/Source (NPN/PNP)	Sink/Source
Load Voltage	+3.5 V ~ +80 V
Max. Load Current	500 mA/Channel

COM Ports
Protocol	Modbus TCP, Modbus UDP

Ethernet
Ports	2 x RJ-45, 10/100 Base-Tx, Switch Ports
Security	Password and IP Filter

Power
Reverse Polarity Protection	Yes
Consumption	24 VDC: 2.3 W Max. 48 VDC: 2.6 W Max.
Powered from Terminal Block	+10 ~ +48 VDC

Mechanical
Dimensions (mm)	33 mm x 127 mm x 99 mm (W x L x H)
Installation	DIN-Rail or Wall mounting

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

ET-2242U CR

Ethernet I/O Module with 2-port Ethernet Switch and 16-ch Sink/Source-type DO (RoHS)

Module 2 cổng Ethernet Modbus TCP & MQTT 16 kênh DO ICP DAS ET-2242U CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng