Bộ mở rộng kênh cho Datalogger Campbell Scientific Granite 10

Thương hiệu: Campbell Scientific | Tình trạng: Còn hàng

Liên hệ

Granite 10 Measurement and Control Data-Acquisition System

THÔNG TIN SẢN PHẨM

Overview

Similar to the Granite™9, the Granite™10 is the most computationally powerful data-acquisition device from Campbell Scientific. As an all-digital measurement and control DAQ, the Granite 10 is designed as the core of the data-acquisition network, integrating with all GRANITE™ measurement modules, including the Volt 108, Volt 116, Temp 120, VWire 305, and CH400. Unlike the Granite 9, however, the Granite 10 also includes four general-purpose CAN channels. With its CAN channels, a larger 128 GB SSD, and extended temperature ranges, the Granite 10 is your ultimate tool for automotive testing.

Benefits and Features

Traditional network connections via Ethernet port
EPI port switch for high-speed connection to all GRANITE measurement modules
Onboard storage of streaming data with 2 GB of DDR3 SDRAM and a 128 GB solid-state hard drive (SSD)
Built-in GPS for network synchronization
General-purpose CAN channels

Detailed Description

The Granite 10 enables you to perform the following:

Standard measurement functions
Advanced math and processing functions
Control functions

Specifications

-NOTE-	Additional specifications are listed in the GRANITE 10 Specifications.
Power Requirements	9.6 to 32 Vdc (voltage input)
Real-Time Clock Accuracy	±3 min. per year
Operating Temperature Range	-40° to +70°C (standard) -55° to +85°C (extended) Non-condensing environment
Case Material	Stainless steel 304 and aluminum 6061
Pulse Counters	8 (C1 to C8)
Communications Ports	CAN FD CAN Ethernet USB Micro B USB host CS I/O 0 to 5 V serial SDI-12 RS-485 RS-422 CPI/RS-232 EPI
Data Storage Ports	microSD USB host
Digital I/O	8 terminals (C1 to C8) configurable for digital input and output. Terminals are configurable in pairs for 5 V or 3.3 V logic for some functions.
Internet Protocols	Ethernet, PPP, RNDIS, ICMP/Ping, Auto-IP (APIPA), IPv4, IPv6, UDP, TCP, TLS (v1.2), DNS, DHCP, SLAAC, Telnet, HTTP(S), SFTP, FTP(S), POP3/TLS, NTP, SMTP/TLS, SNMPv3, CS I/O IP
Communication Protocols	CAN FD, CAN, CPI, EPI, PakBus, PakBus Encryption, SDM, SDI-12, Modbus RTU / ASCII / TCP, DNP3, custom user definable over serial, UDP, NTCIP, NMEA 0183, I2C, SPI
Warranty	3 years standard (against defects in materials and workmanship) Optional: An additional 2 years (against defects in materials and workmanship), bringing the total to 5 years
Battery-backed SRAM for CPU Usage & Final Storage	4 MB
Data Storage	4 MB SRAM + 128 MB NOR flash (Storage expansion of up to 16 GB with removable microSD flash memory card.) 128 GB SSD
Active Current Drain, Average	~6 W 255 mA input (24 V input) 495 mA input (12 V input)
Static Vibrating-Wire Measurements	Not supported
Dimensions	21.4 x 12.0 x 7.5 cm (8.4 x 4.7 x 3.0 in.) Additional clearance required for cables and leads.
Weight	1.2 kg (2.7 lb)

Tài liệu

Brochures

Manuals

GRANITE 9/10 Product Manual (PDF)

Bộ mở rộng kênh cho Datalogger Campbell Scientific Granite 10

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng