I-87088W-G/S CR: Module 8 kênh đầu ra xung PMW + 8 kênh đầu vào bộ đếm tốc độ cao HSC

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-87088W-G/S CR 8-ch PWM Output and 8-ch High-speed Counter Input Module (RoHS) Includes DN-8P8C/S External Board

THÔNG TIN SẢN PHẨM

Features

• 8-channel PWM Output and 8-channel Counter Input
• Burst Mode and Continuous Mode for PWM Output
• Software and Hardware Trigger Mode for PWM Output
• Individual and Synchronous PWM Output
• High-speed Counters
• 4 kV ESD and EFT Protection
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C

Introduction

The I-87088W provides 8-channel PWM (Pulse Width Modulation) Output and 8-channel Counter Input, and can be used to develop powerful and costeffective analog control systems. PWM is a powerful technique for controlling analog circuits that uses the Digital Output to generate a waveform with a variable duty cycle and frequency which can then be used to control an analog circuit in applications such as controlling the position or speed of motors, the brightness of lamps, or the speed of fans, etc. Either burst mode or continuous mode can be used for the PWM output depending on the application. In addition, all Digital Input channels can be used as high-speed counters with a speed of up to 1 MHz. The I-87088W/S allows the load voltage to be increased from +3.5 to +50 V for the 8-channels PWM (Pulse Width Modulation) output and the 8-channels high-speed counter.

Application

• Controlling Motor
• Position/Speed
• Dimming Lamp Brightness
• Controlling Fan Speed

Specification

CPU Module
Watchdog Timer	Yes, Module (1.6 Seconds), Communication (Programmable)

Isolation
Intra-module Isolation	3750 VDC

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact for Each Terminal

LED Indicators
Status	1 x Power and Communication 8 x I/O

Digital Input/Counter
Channels	8
Sink/Source (NPN/PNP)	Sink, Source
Bits	32-bit
Mode	Up
Contact	Wet Contact
ON Voltage Level	+1 VDC Max.
OFF Voltage Level	+3.5 ~ +5 VDC
Frequency	1 MHz

Digital Output
Channels	8
Type	PWM, TTL
Sink/Source (NPN/PNP)	Sink
Load Voltage	+3.5 ~ +5 VDC
Max. Load Current	Sink: +5 VDC @ 10 mA/Channel Source: +5 VDC @ 1 mA/Channel

PWM
Frequency	1 Hz ~ 500 KHz
Duty Cycle	0.1 to 99.9%
Mode	Burst, Continuous
Burst Count	1 to 65535
Trigger Start	Hardware or Software

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Data Format	N, 8, 1
Protocol	DCON

Power
Consumption	1.7 W Max.

Mechanical
Dimensions (mm)	30 x 102 x 115 (W x L x H)

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-87088W-G/S CR

8-ch PWM Output and 8-ch High-speed Counter Input Module (RoHS)
Includes DN-8P8C/S External Board

I-87088W-G/S CR: Module 8 kênh đầu ra xung PMW + 8 kênh đầu vào bộ đếm tốc độ cao HSC

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng