I-8830-G CR: Bộ lập trình nhúng 1 cổng Ethernet + 2 cổng COM + 8 khe cắm module mở rộng

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

I-8830-G CR 8-slot Serial Slave I/O Expansion Unit with 80188-40 CPU, 2 Serial Ports, 1 Ethernet Port (DCON Protocol) (Gray Cover) (RoHS)

THÔNG TIN SẢN PHẨM

Features

• 80188 or compatible (8-bit and 40 MHz)
• MiniOS7 Embedded Operating System (DOS-like)
• Slave I/O unit with DCON protocol (ASCII-based protocol )
• Support I/O configuration with DCON Utility via Ethernet(VxComm Port)
• Simultaneous access by a maximum of 6 host PCs
• Built-in Watchdog
• 7-Segment display x 4
• Input Protection circuitry
• 8 Slots for I-8K and I-87K Modules
• Operating Temperature: -25 ~ +75 °C

Introduction

The I-8830-G is an embedded Ethernet I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc via Ethernet Port or RS-232 Port.

The CPU is a 8-bit 80188 (40 MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. Although all the SDK drivers support only COM Port interface,users can also use there SDK by installing the VxComm Utility . VxComm Utility can create Virtual COM Port to map the Ethernet Port, then the I/O modules can be easily added to the I-8830-G and can be quickly integrated into an existing system.

Specification

Software
Protocol	DCON

CPU Module
CPU	80188 or compatible, 8-bit and 40 MHz
64-bit Hardware Serial Number	Yes
EEPROM	2 KB
Flash	512 KB
SRAM	512 KB
Watchdog Timer	Yes

Display
Type	5 x Digit 7 Segment LED Display

LED Indicators
Status	1 x Power, 3 x Programmable

I/O Expansion
I/O Type	I-8K, I-87K series
Slots	8

COM Ports
Ports	1 x RS-232, 1 x RS-232/RS-485

HMI
DIP Switch	8-bit for address
Push Button	4

Ethernet
Ports	1 x RJ-45, 10Base NE2000 compatible

Power
Input Range	+10 ~ 30 VDC (3 kV Isolated )
Consumption	5.1 W

Mechanical
Dimensions (mm)	355 x 110 x 77 (W x L x H)
Installation	DIN-Rail, Wall mounting

Environmental
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +85 °C
Humidity	5 ~ 95 % RH, Non-condensing

Download

Data sheet

Documents

Ordering information

I-8830-G CR

8-slot Serial Slave I/O Expansion Unit with 80188-40 CPU, 2 Serial Ports, 1 Ethernet Port (DCON Protocol) (Gray Cover) (RoHS)

I-8830-G CR: Bộ lập trình nhúng 1 cổng Ethernet + 2 cổng COM + 8 khe cắm module mở rộng

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng