| Standard & Protocol |
IEEE802.11b/g/n for WLAN
IEEE802.11i for wireless security
IEEE802.11r for fast roaming
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX |
| Cellular network |
3G/4G cellular network, network type FDD-LTE/TDD-LTE/WCDMA/TD-SCDMA/HSPA/CDMA/EVDO |
| Network Settings |
WAN Network, Wireless WiFi, PPPoE Dialing, Mobile network Detection, VLAN, DDNS, Routing Table, Wireless Client Filtering, Port Forwarding , Port Redirection, DMZ Settings, Serial Port Application, UPnP Settings, Static DHCP, VRRP, RIP, OSPF |
| Firewall |
IP Filtering, MAC Filtering, URL Filtering, Keyword Filtering, IP address Black/White List |
| VPN Tunnel |
GRE, PPTP Client/Server, L2TP Client/Server, IPSec, OpenVPN Client |
| System Management |
NTP Client, Access Settings, Timed Restart, Backup Recovery, Log Server, Firmware Upgrade |
| Troubleshooting |
System Log, Ping Test and Route Tracking |
| WiFi Transmission Rate |
802.11n: 6.5~300Mbps
802.11b: 11/5.5/2/1Mbps
802.11g: 54/48/36/24/18/12/9/6Mbps |
| WiFi Radio Frequency |
Channel: 2.412GHz~2.4835GHz
RF power output: 20dBm
Modulation methods: DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM |
| WiFi Receiving Sensitivity |
802.11n_HT40: -82dBm@MCS0, -64dBm@MCS7
802.11n_HT20: -85dBm@MCS0, -67dBm@MCS7
802.11g: -91dBm@6Mbps, -72dBm@54Mbps
802.11b: -93dBm@1Mbps, -87dBm@11Mbps |
| WiFi Transmitting Power |
802.11n_HT40: 20dBm@MCS0, 20dBm@MCS7
802.11n_HT20: 20dBm@MCS0, 20dBm@MCS7
802.11g: 20dBm@6Mbps, 20dBm@54Mbps
802.11b: 23dBm@1Mbps, 20dBm@11Mbps |
| LTE Operating Frequency Band |
TDD-LTE: Band38/39/40/41
FDD-LTE: Band 1/3/5/7/8/20
WCDMA: Band1/5/8
TD-SCDMA: B34/39
EVDO/CDMA1X: BC0
GSM: Band 3/8 |
| LTE Bandwidth (downward, upward) |
TDD-LTE: Rel 9 Cat4 TDD-LTE 112Mbps/30Mbps
FDD-LTE: Rel 9 Cat4 FDD-LTE 150Mbps/50Mbps
DC-HSPA+: 42Mbps/5.76Mbps
HSPA+: 21Mbps/5.76Mbps
UMTS: 384kbps/384kbps
EVDO RevA: 3.1Mbps/1.8Mbps
EVDO Rev0: 2.4Mbps/153.6kbps
TD-HSPA: 4.2Mbps/2.2Mbps
TD- SCDMA: 2.8Mbps/2.2Mbps
CDMA 1x: 153.6kbps/153.6kbps
EDGE: 236.8kbps/236.8kbps
GPRS: 85.6kbps/85.6kbps |
| LTE Sensitivity |
GSM: <-108dBm
WCDMA: <-109dBm
TD-SCDMA: <-108dBm
TDD-LTE:
Band38/39/40: <-100dBm@5MHz BW
Band41: <-98dBm@5MHz BW
FDD-LTE:
Band1: <-100dBm@5MHzBW
Band3/8: <-97dBm@5MHzBW
Band5: <-98dBm@5MHzBW
CDMA: <-108dBm
EVDO: <-108dBm |
| Maximum Transmission Power of LTE |
LTE-FDD/TDD: 23 ±2dBm
WCDMA: 24 +1/-3dBm
TD-SCDMA: 24 +1/-3dBm
EVDO/CDMA 1X: 24 ±1dBm
GSM850/900: 33±2dBm
GSM1800/1900: 30±2dBm |
| Serial Port Parameter |
Standard: EIA RS-232C, RS-485, RS-422
Quantity of serial port: 1 3IN1 serial port
RS-232 signal: RXD, TXD, GND
RS-485 signal: D+, D-, GND
RS-422 signal: T+, T-, GND, R+, R-
Baud rate: 300~115200bps
Data bit: 7bit, 8bit
Parity bit: None, Even, Odd
Stop bit: 1bit, 2bit
Direction control: RS-485 direction adopts Automatic Data Direction Control (ADDC)
Load capacity: RS-485/422 end supports 32-node polling environment
Transmission distance: RS-232, 15m; RS-485/422, 1200m
Work mode: RealCom, TCP Client, TCP Server, UDP Client, UDP Server |
| Interface |
WAN port: 1 10/100Base-T(X) RJ45 port
LAN port: 2 or 4 10/100Base-T(X) RJ45 ports
Serial port: 1 RS-232/485/422, with 2×5-pin 3.81mm pitch terminal (occupies 6 pins)
I/O port (reserved): 1 DI input and 1 DO output, adopt 2×5 3.81mm pitch terminal block (occupies 4 pins)
SIM slot: 2 SIM slots, redundancy backup, support Micro SIM card
Antenna interface: 2 LTE antenna interfaces, SMA-K (Female), the master antenna is used to send/receive information, and the slave antenna is used to receive information; 2 WIFI antenna interfaces, RP-SMA-K (Female) |
| Indicator |
Running indicator, WLAN indicator, power indicator, LTE signal strength indicator, 4G indicator, LAN/WAN port indicator, COM indicator and IO indicator |
| Power Supply |
12~36VDC, dual power supply redundancy, support non-polarity, adopt 4-pin 5.08mm pitch terminal blocks |
| Power Consumption |
IRT5300L-5T2D-2P12_36:
No-load: 2.4W@24VDC
Full-load: 8.1W@24VDC (high temperature) |
| Working Environment |
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%~95% (no condensation) |
| Physical Characteristic |
Housing: IP40 protection, metal
Dimension (W x H x D): 40.6mm x 103mm x 78 mm(exclude antenna)
Installation: DIN-Rail mounting
Weight: ≤ 270g |
| Industrial Standard |
IEC 61000-4-2 (ESD, electrostatic discharge), Level 3
Air discharge:± 8kV
Contact discharge: ±6kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Ethernet port: ±1kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Ethernet port: common mode±2kV, differential mode±1kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 |
| Authentication |
CE, FCC, RoHS |
