Thiết bị đo và hiển thị điện thông minh 3 pha 100A RS-485 Modbus RTU ICP DAS PM-2133D-160P CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

3-phase Smart Power Meter with LED Display

THÔNG TIN SẢN PHẨM

Features

• Bi-directional Energy
• True RMS Power Measurements
• Energy Analysis for 3P4W, 3P3W, 1P3W, 1P2W
• Current Measurements Up to 100 A with Different CT Ratio
• Voltage Measurements Up to 500 V
• Clip-on CT for Easy Installation
• W Accuracy Better than 0.5% (PF=1)
• Total Harmonic Distortion (THD)
• 8-Digit LED Display
• Supports Modbus RTU Protocol

Introduction

ICP DAS brings the most powerful, cost-effective, advanced Smart Power Meters PM-2133D series that gives you access to real-time electric usage for three-phase power measurement. With its high accuracy (<0.5%, PF=1 ), the PM-2133D series can be applied to both low voltage primary side and/or medium/high voltage secondary side and enables the users to obtain reliable and accurate energy consumption readings from the monitored equipments in real time under operation. These compact size and cost-effective power meters are equipped with revolutionary wired clip-on CT (various types, support input current up to 400 A). It operates over a wide input voltages range 10 ~ 500 VAC which allows worldwide compatibility. This meter has LED display shows power.

Application

• Generator monitoring
• Switchgear distribution systems
• Energy Management
• Power quality analysis

Specification

AC Power Measurement
Wiring	3P4W-3CT, 3P3W-2CT, 3P3W-3CT, 1P2W-1CT, 1P3W-2CT
Loops	Three-phase
Input Voltage	10 ~ 500 V
Input Current	CTØ16 mm (0.1 A ~ 100 A)
Input Frequency	50 Hz (Range 45 ~ 55 Hz)/60 Hz (Range 55 ~ 65 Hz)
W Accuracy	Better than 0.5% (PF=1)
Power Parameter Measurement	True RMS voltage (Vrms), True RMS current (Irms), Active Power (kW), Active Energy (kWh), Apparent Power (kVA), Apparent Energy (kVAh), Reactive Power (kVAR), Reactive Energy (kVARh), Power Factor (PF), Frequency (45 ~ 65 Hz)
Data Update Rate	1 Second
LED Display	Yes, 8-digit

CT
Includes CTs	3
Type	Clip
Max. Current	100 A
Inside Diameter	16 mm
Leading Cable	4 m

COM Ports
Ports	1 x RS-485
Baud Rate	9600, 19200 (default), 38400, 115200
Data Format	N,8,1; N,8,2; E,8,1; E,8,2; O,8,1; O,8,2
Protocol	Modbus RTU
Isolation	3000 VDC

Power
Input Range	+85 ~ +264 VAC (277 VAC available)
Consumption	6 W

Mechanical
Casing	Plastic
Dimensions (mm)	110 x 115 x 50 (W x L x H)
Installation	Panel Mounting

Environmental
Operating Temperature	-20 ~ +70 °C
Storage Temperature	-25 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

PM-2133D-160P CR

Modbus RTU, 3-phase power meter; includes 100A CT (Inside diameter 16 mm; wire lead 4 m) x 3 (RoHS)

Thiết bị đo và hiển thị điện thông minh 3 pha 100A RS-485 Modbus RTU ICP DAS PM-2133D-160P CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng