Bộ đổi nguồn Din-Rail 3 pha 340 ~ 550VAC AMLPULS AMTR48048N 480W, 48DC, 10A, PFC, DC/OK
Features
Three-Phase 340-550VAC wide range input
(Dual phase operation possible)
Width only 85.5mm
Built-in passive PFC function compliance to BS EN/EN61000-3-2
High efficiency 93% and low power dissipation
Protections:Short circuit/Overload/Over voltage/Over temperature
Cooling by free air convection
Built-in constant current limiting circuit
can be installed on DIN rail TS-35/7.5 or 15
Optional DC OK relay contact
1 years warranty
Specification
Input |
||||
Voltage range Note.1 |
Three-Phase 340 ~ 550VAC (Dual phase operation possible) 480 ~ 780VDC |
|||
Leakage current |
<3.5mA / 530VAC |
|||
Frequency range |
47-63Hz |
|||
Inrush current (Typ.) |
Cold start :50A |
|||
Power factor(Typ.) |
PF≧0.9/400VAC PF≧0.88/500VAC at full load |
|||
AC Current(Typ.) |
0.85A/400VAC 0.7A/500VAC |
|||
Output |
||||
DC voltage (V) |
24V |
48V |
||
Efficiency(TYP.) |
92.5% |
93% |
||
Rated Current (A) |
20A |
10A |
||
Current range(A) |
0-20A |
0-10A |
||
Rated power(W) |
480W |
480W |
||
Ripple & noise(max ) Note.2 |
150mVp-p |
150mVp-p |
||
Voltage ADJ.range |
24-28V |
48-55V |
||
Voltage tolerange Note.3 |
±1% |
±1% |
||
Line regulation |
±0.5% |
±0.5% |
||
Load regulation |
±1% |
±1% |
||
Setup,rise time |
1200ms 60ms/400VAC 800ms 60ms/500VAC(at full load) |
|||
Hold up time(Typ.) |
20ms/400VAC 20ms/500VAC(at full load) |
|||
Status indicator |
Green LED |
|||
Protection |
||||
Overload |
105 ~ 130% rated output power |
|||
Protection type : Constant current limiting, unit will shut down after 3 sec. ,re-power on to recover |
||||
Over voltage(V) |
29 ~ 33V |
56 ~ 65V |
||
Protection type : Shut down o/p voltage, re-power on to recover |
||||
Over temperature |
Shut down o/p voltage, recovers automatically after temperature goes down |
|||
Safety and EMC |
||||
Withstand voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC OK(optional):0.5KVAC |
|||
Isolation resistance |
I/P-O/P, I/P-FG, O/P-FG:>100M Ohms / 500VDC / 25℃/ 70% RH |
|||
Safety standards |
Design reference UL508, IEC62368-1,UL 62368-1, AS/NZS 62368.1 |
|||
EMC emission |
Parameter |
Standard |
Test Level / Note |
|
Conducted |
BS EN/EN55032(CISPR32)/BS EN/EN61204-3 |
Class B |
||
Radiated |
BS EN/EN55032(CISPR32)/BS EN/EN61204-3 |
Class B |
||
Harmonic Current |
BS EN/EN61000-3-2 |
Class A |
||
Voltage Flicker |
BS EN/EN61000-3-3 |
....... |
||
EMC immunity |
BS EN/EN55024 , BS EN/EN61204-3 |
|||
Parameter |
Standard |
Test Level / Note |
||
ESD |
BS EN/EN61000-4-2 |
Level 4, 15KV air ; Level 4, 8KV contact |
||
Radiated Field |
BS EN/EN61000-4-3 |
Level 3 |
||
EFT / Burst |
BS EN/EN61000-4-4 |
Level 3 |
||
Surge |
BS EN/EN61000-4-5 |
Level 4, 2KV / Line-Line, Level 4, 4KV/ Line-Earth |
||
Conducted |
BS EN/EN61000-4-6 |
Level 3 |
||
Magnetic Field |
BS EN/EN61000-4-8 |
Level 4 |
||
Voltage Dips and Interruptions |
BS EN/EN61000-4-11 |
>95% dip 0.5 periods, 30% dip 25 periods> 95% interruptions 250 periods |
||
Environmental |
||||
Working temperature Note.5 |
- 30~+70 ℃ (Refer to "Derating curve ") |
|||
Storage TEMP.humidity |
-40~+85℃ 10 ~ 95% |
|||
Working humidity |
20 ~ 95% RH non-condensing |
|||
TEMP.coefficient |
±0.03%/℃ (0 ~ 50℃) |
|||
Vibration |
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 |
|||
Others |
||||
Mean time between failure |
1174.0K hrs min MIL-HDBK-217F(25℃) |
|||
Installation |
Install on DIN rail TS35 |
|||
Weight |
About 1.51kg |
|||
Length*width*height |
85.5*125.2*128.5mm |
|||
Data |
Details |
Model name |
||
|
AMTR 480W 20A/24V |
AMTR48024N |
||
AMTR 480W 10A/48V |
AMTR48048N |
Download