Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đBộ đổi nguồn AC/DC Din-Rail AMLPULS AMSR12012N 120W, 12VDC, 10A, PFC, DC/OK
Features
Cooling by free air convection
High efficiency 91% and low power dissipation
150% peak load capability
Built-in DC OK relay contact
Protections:Short citcuit/Overload/Over voltage/Over temperature
Built-in active PFC function, PF>0.93
Can be installed on DIN rail TS-35/7.5 or 15
100% full load burn-in test
1 years warranty
Specification
|
Input |
||||
|
Voltage range Note.1 |
88-264VAC 124-370VDC |
|||
|
AC current (Typ.) |
1.4A/115VAC, 0.7A/230VAC |
|||
|
Frequency range |
47-63Hz |
|||
|
Inrush current (Typ.) |
35A/115VAC, 70A/230VAC |
|||
|
Leakage current |
<1mA/240VAC |
|||
|
Output |
||||
|
DC voltage (V) |
12V |
24V |
48V |
|
|
Efficiency |
89% |
91% |
90.50% |
|
|
Rated Current (A) |
10A |
5A |
2.5A |
|
|
Current range |
0-10A |
0-5A |
0-2.5A |
|
|
Rated power(W) |
120W |
120W |
120W |
|
|
Voltage ADJ. range |
12-14V |
24-28V |
48-55V |
|
|
Peak current |
15A |
7.5A |
3.75A |
|
|
Peak power Note.8 |
180W(3sec.) |
|||
|
Ripple & noise(max ) Note.2 |
100mVp-p |
100mVp-p |
120mVp-p |
|
|
Voltage tolerange Note.4 |
±1.0% |
±1.0% |
±1.0% |
|
|
Line regulation |
±0.5% |
±0.5% |
±0.5% |
|
|
Load regulation |
±1.0% |
±1.0% |
±1.0% |
|
|
Setup，rise time |
1500ms 60ms/230VAC 3000ms 60ms/115VAC (at full load) |
|||
|
Hold up time （Typ.) |
20ms/230VAC 20ms/115VAC (at full load) |
|||
|
Status indicator |
Green LED |
|||
|
Protection |
||||
|
Overload |
Normally works within 110 ~ 150% rated output power for more than 3 seconds and then shut down o/p voltage |
|||
|
>150% rated power, constant current limiting with auto-recovery within 3 seconds and shut down o/p voltage after 3 seconds |
||||
|
Over voltage(V) |
14-17V |
29-33V |
56-65V |
|
|
Protection type:Shut down o/p voltage, re-power on to recover |
||||
|
Over temperature |
95℃±5℃ (TSW : detect on heatsink of power switch) |
|||
|
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down |
||||
|
Safety and EMC |
||||
|
Withstand voltage |
I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC O/P-DC/OK:0.5KVAC |
|||
|
Isolation resistance |
I/P-O/P,I/P-FG,O/P-FG :＞100M Ohms/500VDC/25℃/70﹪RH |
|||
|
Safety standards |
Design reference UL508, TUV EN62368-1 EAC TPTC 004 approved , , BSMI CNS14336-1 ;(meet EN60204-1) |
|||
|
EMC emission |
Design reference to EN55032 (CISPR32), EN61204-3 Class B, EN61000-3-2,-3, EAC TP TC 020, CNS13438 Class B |
|||
|
EMC immunity |
Design reference EN61000-4-2,3,4,5,6,8,11, EN55035, EN61000-6-2 ( EN50082-2), BS EN/EN61204-3, heavy industry level, , SEMI F47 approved |
|||
|
Environmental |
||||
|
Working temperature |
- 25～+70 ℃ （Refer to "Derating curve "） |
|||
|
Storage temperature humidity |
﹣40～+85℃,10-95% RH |
|||
|
Working humidity |
20-95﹪ RH non-condensing |
|||
|
Vibration |
Component:10-500Hz,2G 10 min/1cycle ,60 min each along X,Y,Z axes |
|||
|
Others |
||||
|
Mean time between failure |
1764.6K hrs min Telcordia SR-332(Bellcore); 292.1K hrs min. MIL-HDBK-217F(25℃) |
|||
|
Installation |
Install on DIN rail TS35 |
|||
|
Weight |
0.67kg |
|||
|
Width*height*Depth |
40*125.2*113.5mm |
|||
|
Data |
Details |
Model name |
||
|
|
AMSR 120W 10A/12V |
AMSR12012N |
||
|
AMSR 120W 5A/24V |
AMSR12024N |
|||
|
AMSR 120W 2.5A/48V |
AMSR12048N |
|||
Download
