I-87016 2 Channel Isolated Strain Gauge Input Module

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

2 Channel Isolated Strain Gauge Input Module

THÔNG TIN SẢN PHẨM

I-87016 2 Channel Isolated Strain Gauge Input Module

Features

I-87016 has a serial bus (RS-485) communication interface with DCON protocol. It can be plugged into our WinCon, LinCon, I-8000 controllers and I-87K, RF-87K I/O expansion units. I-87016 is an Isolated Strain Gauge Input Module with 2 channels. I-87016 is a serial cartridge based I/O module that offers the ultimate in cost effective flexibility.

Specifications

2 Only one channel is available at a time
Analog Input Type : mV, V, mA
Sampling Rate: 10 Samples/Second
Resolution: 16-bits
Bandwidth: 5.24Hz
Accuracy: ±0.05% FSR
Zero Drift: ±0.5%V/°C
Span Drift: 25ppm/°C
CMR @ 50/60Hz: 150dB
NMR @ 50/60Hz: 100dB
Input Impedance: 20M Ohms
Isolation: 3000V rms

Digital Output
Channels: 4
Open Collector to 30V
Output Load: sink 30mA max
Power Dissipation: 30mW

Digital Input
Channels: 1
Logic Level 0: +1V max
Logic Level 1: +3.5 to 30V

Event Counter
Max Input Frequency: 50Hz
# Min. Pulse Width: 1mS

Power Supply
# Input: +5Vdc
Consumption :2.4W

I-87016 2 Channel Isolated Strain Gauge Input Module

I-87016 2 Channel Isolated Strain Gauge Input Module

Features

Specifications

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng