Switch công nghiệp quản lý 6 cổng Ethernet + 2 cổng quang + WiFi 3Onedata IES6100-6T2F-W2-HV
IES6100 series are 8/9-port fiber/copper layer 2 managed industrial Ethernet switches. This series provide 4 products and support 100M copper ports, fiber ports, WiFi antenna interfaces and other kinds of interfaces. They adopt wall or DIN-Rail mounting to meet the requirements of different application scenes.
Network management system supports various network protocols and industrial standards, such as STP/RSTP, MRP, 802.1Q VLAN, QoS Function, LLDP, IGMP Snooping Function, Port Trunking, Port Mirroring, 802.1X, Modbus TCP; Support wireless AP mode and bridge mode; It also possesses complete management functions, including SNMP, DHCP Server, Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
This series of device supports port alarm. DC power products adopt two independent power supply circuits to ensure that the device can still run normally when one power supply fails;When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart city, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
Tính năng
- Support 2 2.4G WIFI antenna interfaces
- Support wireless AP and bridge work modes
- Support 2/3 100M fiber ports (1x9) and 6 100M copper ports
- Adopt patented Ring technology, support single ring, coupling ring, chain, Dual-homing, automatic recovery time of network failure < 20ms
- Support DC dual power supply input, input voltage: 9~60VDC; support 85～264VAC/DC power input
- Support -40~75℃ wide operating temperature range
Thông số kỹ thuật
|
Standard & Protocol |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid Spanning Tree Protocol
IEEE 802.1Q for VLAN
IEEE 802.1p for CoS
IEEE 802.1AB for LLDP
IEEE 802.1X for 802.1X Authentication |
|
Management |
SNMP v1/v2c/v3 Centralized Management of Equipment, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Port Statistics |
|
Security |
Classification of User Permissions, Port Alarm, Power Alarm, IEEE802.1X, Threshold Alarm, Loop Protection |
|
Switch Function |
802.1Q VLAN, Static Port Aggregation, Bandwidth Management, Flow Control |
|
Unicast / Multicast |
Static Multicast, IGMP-Snooping |
|
Redundancy Technology |
Ring, STP/RSTP, MRP |
|
Wireless |
AP, bridge |
|
Interface |
100M copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning
100M fiber port: 100Base-FX, 1×9 fiber port
Console port: CLI command line management port(RS-232), RJ45
Alarm port: 6-pin 5.08mm pitch terminal blocks (2 pins for relay), support 1 relay alarm output
Antenna interface: 2 WiFi antenna interfaces, RPSMA-K(Female) |
|
Indicator |
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator |
|
Switch Property |
Transmission mode: store and forward
MAC address: 8K
Buffer: 1Mbit
Backplane bandwidth: 7.6G
Switch time delay: <10μs |
|
Power Supply |
DC power supply
The rated voltage is 12/24/48VDC(9-60VDC), dual power supplies, and support 6-pin 5.08mm pitch terminal with built-in overcurrent protection, power supplies occupy 4 pins
DC power supply
20VAC/DC (85~264VAC/DC), support 6-pin 5.08mm pitch terminal with built-in overcurrent protection, power supplies occupy 4 pins |
|
Power Consumption |
IES6100-6T2F-W2-2LV Full-load: 8.3W@24VDC
IES6100-6T2F-W2-2LV No-load: 7.2W@24VDC |
|
Working Environment |
Operating temperature: -40~75℃
Storage temperature:-40~85℃
Relative humidity: 5%～95% (no condensation) |
|
Physical Characteristic |
Housing: IP40 protection, metal
Installation: DIN-Rail or wall mounting
Dimension (W x H x D): 53mm×138mm×110mm
Weight: 750g |
|
Industrial Standard |
DC products
IEC 61000-4-2 (ESD, electronic static discharge), Level 4
Air discharge: ± 15kV
Contact discharge: ±8kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 4
Power supply: ±4kV
Ethernet port: ±2kV
Relay: ±4kV
IEC 61000-4-5 (Surge), Level 4
Power supply: common mode±4kV, differential mode±2kV
Ethernet copper port: ±4kV
AC products
IEC 61000-4-2 (ESD, electronic static discharge), Level 4
Air discharge: ± 15kV
Contact discharge: ±8kV
IEC 61000-4-4 (EFT, electrical fast transient pulses), Level 3
Power supply: ±2kV
Ethernet port: ±2kV
Relay: ±4kV
IEC 61000-4-5 (Surge), Level 3
Power supply: common mode±2kV, differential mode±1kV
Ethernet copper port: ±4kV
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6 |
|
Authentication |
CE, FCC, RoHS |
|
Warranty |
3 years |
Download
Datasheet
Quick Guide
Thông tin đặt hàng
|
Available Models |
100M Copper Port |
100M Fiber Port |
Antenna Interface |
Power Supply |
|
IES6100-6T3F-2LV |
6 |
3 |
― |
9-60VDC, dual power supply |
|
IES6100-6T3F-HV |
6 |
3 |
― |
220VAC/DC |
|
IES6100-6T2F-W2-2LV |
6 |
2 |
2 |
9-60VDC, dual power supply |
|
IES6100-6T2F-W2-HV |
6 |
2 |
2 |
220VAC/DC |
