Bộ chuyển đổi quang điện công nghiệp quản lý 2 cổng Ethernet + 1 cổng quang + 1 cổng RS-232/422/485 3Onedata IMC100-2T1F-1DI(3IN1)
IMC100-2T1F-1DI is 4-port managed industrial media converter which provides 100M fiber port, 100M copper port and 3IN1 serial port. It adopts DIN-Rail mounting to meet the requirements of different scenes.
The network management system supports message suppression of broadcast, multicast and unknown unicast. Functions like One-Key VLAN, Serial Port Parameter Configuration, Operating Mode Configuration, IP Address Filtering, MAC Address Filtering, Alarm Setting, File Management and User Password Management are also supported. Network management system could provide you with great user experience via its friendly interface design and convenient operation.
The power supply input consists of two independent power supply circuits, which can ensure device’s normal operation when one fails. The hardware adopts fanless, low power consumption and wide temperature and voltage range design. It also has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safe city, new energy, intelligent manufacturing and other industrial fields.
Tính năng
Thông số kỹ thuật
Standard & Protocol | IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX and 100BaseFX IEEE 802.3x for flow control |
Interface | Copper port:: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/MDI-X Autotunning
Fiber port: 100Base-FX, optional SC/ST/FC Serial port: RS-232/422/485 (3IN1) |
Serial Port | Serial port quantity: 1 RS-232/422/485
RS-485 signal: D+, D-, GND RS-422 signal: T+, T-, R+, R-, GND RS-232 signal: RX, TX, GND Check bit: None, Even, Odd Data bit: 7bit, 8bit Stop bit: 1bit, 2bit Baud rate: 300bps-115200bps Direction control: RS-485 adopts automatic data flow control technique Load capability: RS-485 supports 32-point polling environment |
LED Indicator | Running indicator, port indicator, power supply indicator, serial port receiving and sending indicator |
Switch Property | Transmission mode: store-and-forward
MAC address: 16K Packet buffer size: 4Mbit Backplane bandwidth: 5.6G |
Power Requirement | 9~70VDC, dual power supply redundancy
4-pin pitch 7.62mm terminal block |
Power Consumption | No-load: 3.00W@24VDC
Full-load: 3.24W@24VDC |
Operating Environment | Operating temperature: -40~85℃
Storage temperature: -40~85℃ Relative humidity: 5%~95% (no condensation) |
Physical Characteristic | Housing: IP40 protection, metal
Installation: DIN-Rail mounting Dimension (W x H x D): 36mm×110mm×97mm Weight: 410g |
Industrial Standard | IEC61000-4-2 (ESD, Electrostatic Discharge), Level 3
Air discharge: ±8kV Contact discharge: ±6kV IEC61000-4-4 (EFT, Electrical fast transient), Level 3 Power supply: ±2kV Ethernet port: ±1kV IEC61000-4-5 (Surge), Level 3 Power supply: differential mode±1kV, common mode±2kV Signal: differential mode±1kV, common mode±2kV Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
Certification | CE, FCC, RoHS |
Thông tin đặt hàng
Available Models | 100M Copper Port | 100M Fiber Port | 3IN1 Serial Port | Power Supply |
IMC100-2T1F-1DI(3IN1) | 2 | 1 | 1 | 9~70VDC (dual power supply) |
Tài liệu
Datasheet