-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
1-ch RTD Input Module with 1 DI and 2 DO using DCON and Modbus Protocols
Module RS-485 Modbus RTU 1 kênh đầu vào nhiệt RTD + 1 kênh đầu vào số DI + 2 kênh đầu ra số DO ICP DAS M-7013P-G CR
Features
• High/Low Alarm for Digital Output
• 50Hz Event Counter for Digital Input
• ±120 VDC Overvoltage Protection
• 1-channel RTD Input
• Lead Resistance Elimination for 3/4-wire Connection
• Open Wire Detection
• 3000 VDC Intra-module Isolation
• Dual Watchdog
• Wide Operating Temperature Range: -25 to +75°C
Introduction
The I-7013(D) and M-7013P(D) is a 1-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7013(D) and M-7013P(D) also includes 3000 VDC intra-module isolation and supports lead resistance elimination for 3/4-wire connections. The M-7013P and M-7013PD added support for 1-channel digital input as 50 Hz event counter and 2-channel digital output as high/low alarm. The M-7013P and M-7013PD support both the Modbus RTU and DCON protocols, which can be configured via software.
Specification
CPU Module | |
---|---|
Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
Isolation | |
---|---|
Intra-module Isolation | 3000 VDC |
EMS Protection | |
---|---|
EFT (IEC 61000-4-4) | ±4 kV to Power Line |
ESD (IEC 61000-4-2) | ±4 kV Contact for each Terminal ±4 8 kV Air for random point |
Surge (IEC 61000-4-5) | ±0.5 kV for Power Line |
LED Indicators | |
Status | 1 x Power and Communication |
Analog Input | |
---|---|
Channels | 1 |
Type | RTD |
Sensor Type | Pt100, Pt1000, Ni120 |
Resistance Measurement | 3.2 kΩ Max. |
Resolution | 16-bit |
Accuracy | ±0.05% |
Sampling Rate | 10 Hz |
Overvoltage Protection | ±120 VDC |
Individual Channel Configuration | No |
Open Wire Detection | Yes |
3-wire RTD Lead Resistance Elimination | Yes |
Digital Input/Counter | |
---|---|
Type | Dry Contact |
Sink/Source (NPN/PNP) | Source |
Dry Contact, ON Voltage Level | Close to GND |
Dry Contact, OFF Voltage Level | Open |
Max. Counts | 16-bit |
Frequency | 50 Hz |
Overvoltage Protection | ±30 VDC |
Digital Output | |
---|---|
Channels | 2 |
Type | Open Collector, MOSFET |
Sink/Source (NPN/PNP) | Sink |
Load Voltage | 3.5 ~ 50 VDC |
Max. Load Current | 700 mA/Channel |
Overvoltage Protection | 60 VDC |
Overload Protection | 1.4 A (with Short-circuit Protection) |
Power on Value | Yes |
Safe Value | Yes |
COM Ports | |
---|---|
Ports | 1 x RS-485 |
Baud Rate | 1200 to 115200 bps |
Data Format | (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
Protocol | Modbus RTU, DCON |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | +10 ~ +30 VDC |
Consumption | 0.6 W |
Mechanical | |
---|---|
Dimensions (mm) | 123 x 72 x 35 (W x L x H) |
Installation | DIN-Rail |
Environmental | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -40 ~ +85 °C |
Humidity | 10 ~ 95% RH, Non-condensing |
Download
Ordering information
M-7013P-G CR | 1-ch RTD Input Module with 1 DI and 2 DO using DCON and Modbus Protocols (Gray Cover) (RoHS) |
Số lượng:
Tổng tiền: