Bộ chuyển đổi 1 cổng RS-232 + 1 cổng RS-485 sang Ethernet ICP DAS M2M-710D CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

Remote Maintenance Ethernet Device Terminal Unit with RS-232 and RS-485 Ports

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi 1 cổng RS-232 + 1 cổng RS-485 sang Ethernet ICP DAS M2M-710D CR

Feature

  • Support VxServer Software.
  • Provide pair connection (RS-232,RS-485) on network.
  • Support Server and Client communication mode.
  • Support VxComm function in server mode.
  • Be applied with other M2M products (M2M-420-A, M2M-720-A…).
  • Support RS-232 or RS-485 serial communication ports.
  • Web-based administration.
  • Built-in MiniOS7 OS to keep off the computer virus.
  • Ethernet Protocol: TCP, UDP, IP, ICMP, ARP, RARP.
  • Provide dynamic DNS function.
  • Supply static IP/DHCP (Ad Hoc mode don’t support DHCP).
  • Quick start.
  • 5-Digit 7 Segment LED Display.
  • EMI, RoHS compliance.

Introduction

The M2M-710D module is specially designed for the remote maintenance and upgrading the serial to network application solution. It is suitable for the harsh industrial field. M2M-710D provides 2 major technologies on networking. The Pair connection provides TCP data tunneling between 2 serial devices. Therefore, by means of TCP/IP server/client infrastructure, M2M-710D can provide the remote serial data transmission by Ethernet between local and remote sides. This solution can transfer the site condition of equipment accurately. The maintenance engineer can directly check and diagnose the device/PLC like on-site. This can reduce the huge maintenance cost to increase the competition of enterprises. Except for the functionality above, M2M-710D can also be accommodatingly in other equipment (M-4132, M2M-720-A, M2M-711D…). M2M-710D also Support VxComm and VxServer functions . The user-friendly VxComm Driver/Utility and VxServer allow users to easily turn the built-in COM ports of the M2M-710D into standard COM ports on a PC. By virtue of its protocol independence, a small-core OS and high flexibility, the M2M-710D is able to meet the demands of every network-enabled application. (V25 or latter)

Application

1. Serial application revolution: Upgrade the original serial application to network application.



2. Remote Maintenance: Establish the remote maintenance system of the equipments sold in the world.



3. Virtual Com: Remote maintenance by Virtual Com technology. (It's not supported in Wi-Fi mode)



4. VxServer mode: The user-friendly VxComm Driver/Utility and VxServer allow users to easily turn the built-in COM ports of the M2M-710 into standard COM ports on a PC.

Specifications

CPU Module
CPU 80186, 80 MHz
EEPROM 16 KB; Data retention: 40 years; 1,000,000 erase/write cycles.
Flash Flash ROM: 512 KB ; Erase unit is one sector (64 KB) ; 100,000 erase/write cycles
SRAM 16 KB
Display
Type 5-Digit 7 Segment LED Display
LED Indicators
Status 1 x System LED Indicator
1 x Communication
COM Ports
Ports 1 x RS-232
1 x RS-485
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
Parity None, Even, Odd
Data Bit 7, 8
Stop Bit 2 (data bit must be 7 bit) or 1
Ethernet
Ports 10/100Base-TX Ethernet Controller
RJ-45 with LED indicator
Power
Consumption 2.5 W for M2M-710D
Mechanical
Dimensions (mm) 72 x 123 x 33 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C

Download

Datasheet

Documents

Ordering Information

M2M-710D     CR  Remote Maintenance Ethernet Device Terminal Unit with RS-232 and RS-485 Ports (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: