Bộ đổi nguồn Din-Rail MCTT MCD240-24 240W, 24VDC, 10A

Thương hiệu: MCTT | Tình trạng: Còn hàng

Liên hệ

THÔNG TIN SẢN PHẨM

Bộ đổi nguồn Din-Rail MCTT MCD240-24 240W, 24VDC, 10A

MCD240 series is one economical slim 240W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 63mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current.

In MDC240 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 85%, the product can operate at the ambient temperature between -10°C and 70°C under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950-1, and etc.) make MDC240 a very competitive power supply solution for industrial applications.

Tính năng

Universal AC input/ Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
LED indicator for power on
Can be installed on Din-rail TS-35/7.5 or 15
100% full load burn-in test
Fixed switching frequency at 100KHz

Thông số kỹ thuật

Model		MCD240-24	MCD240-48
Output	DC Voltage	24V	48V
	Rated Current	10A	5A
	Current Range	0~10A	0~5A
	Rated Power	240W	240W
	Ripple & Noise	150mVp-p	150mVp-p
	Voltage Adj. Range	24~28V	48~55V
	Voltage Tolerance	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%
	Load Regulation	±1.0%	±1.0%
	Setup, Rise Time	1500ms, 100ms/230VAC; 3000ms, 100ms/115VAC at full load
	Hold Up Time	28ms/230VAC; 22ms/115VAC at full load
Input	Voltage Range	90 ~ 264 VAC 120 ~ 370VDC
	Frequency Range	47 ~ 63Hz
	Efficiency	88.5%	90%
	AC Current	2.5A/115VAC; 1.3A/230VAC
	Inrush Current	Cold start 20A at 115VAC, 35A at 230VAC
	Leakage Current	<1mA / 240VAC
Protection	Over Load	105 ~ 130%
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage	29~33V	56~65V
		Protection type: shut down o/p voltage, re-power on to recover
	Over Temperature	Shut down o/p voltage, recovers automatically after temperature goes down
Environment	Working Temp.	-20 ~ +70℃
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	Component: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes Mounting: Compliance to IEC60068-2-6
Safety & EMC	Safety Standards	Design refer to UL508,UL60950-1, TUV EN60950-1
	Withstand Voltage	I/P-O/P: 3KVAC, I/P-FG: 2KVAC, O/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
	EMC standards	Compliance to EN55011, EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2)
Others	Dimension	63125.2113.5mm (LWH)
	Weight	1.0kg
	Connection	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.

Tài liệu

Datasheet

Bộ đổi nguồn Din-Rail MCTT MCD240-24 240W, 24VDC, 10A

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng