Bộ đổi nguồn tổ ong MCTT MCE75-24 75W, 24VDC, 3.1A

Chia sẻ

Thương hiệu: MCTT Loại: MCE75

Tình trạng: Còn hàng

Mã sản phẩm: MCE75-24

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Mô tả sản phẩm

Bộ đổi nguồn tổ ong MCTT MCE75-24 75W, 24VDC, 3.1A

MCE75 series is a 75W single output enclosed type power supply with 30mm of low profile design. Adopting the full range 85~264VAC input, the entire series provides an output voltage line of 5V, 12V and 24VDC.

In addition to the high efficiency up to 90%, the design of metallic mesh case enhances the heat dissipation of MCE75 that the whole series operates from -30 ~ 70℃ under air convection without a fan. Delivering an extremely low no load power consumption (less than 0.3W), it allows the end system to easily meet the worldwide energy requirement. MCE75 has the complete protection functions and 5G anti-vibration capability; it is complied with the international safety regulations such as UL60950-1, EN60950-1, IEC/EN61558-2-16 and CCC GB4943. MCE75 series serves as a high price-to-performance power supply solution for various industrial applications.

Tính năng

Universal AC input/ full range
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70℃
High efficiency, long life and high reliability

Thông số kỹ thuật

Model		MCE75-5	MCE75-12	MCE75-24
Output	DC Voltage	5V	12V	24V
	Rated Current	14A	6.3A	3.1A
	Current Range	0~14A	0~6.3A	0~3.1A
	Rated Power	40W	75.6W	74.4W
	Ripple & Noise	100mVp-p	120mVp-p	150mVp-p
	Voltage Adj. Range	4.5 ~ 5.5V	10.2~ 13.8V	21.6~28.8V
	Voltage Tolerance	±2.0%	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%	±0.5%
	Load Regulation	±1.0%	±0.5%	±0.5%
	Setup, Rise Time	500ms, 30ms/230VAC 500ms, 30ms/115VAC at full load
	Hold Up Time	60ms/230VAC 12ms/115VAC at full load
Input	Voltage Range	85 ~ 264VAC 120 ~ 373VDC
	Frequency Range	47 ~ 63Hz
	Efficiency	86.5%	90%	89%
	AC Current	1.4A/115VAC 0.85A/230VAC
	Inrush Current	Cold start 50A/230VAC
	Leakage Current	<0.75mA / 240VAC
Protection	Over Load	110 ~ 150% rated output power
		Protection type: Hiccup mode, recovers automatically after fault condition is removed
	Over Voltage	5.75~6.75V	13.8~16.2V	28.8~33.6V
		Protection type: shut down o/p voltage, re-power on to recover
Environment	Working Temp.	-30 ~ +70℃
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMC	Safety Standards	UL60950-1, IEC/EN60950-1, IEC/EN61558-2-16, IEC/EN60335-1, CCC GB4943 approved
	Withstand Voltage	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.25KVAC, 1 minute
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
	EMC standards	Compliance to EN55022 class B, EN55014, EN61000-3-2,3, EN61000-4,2,3,4,5,6,8,11, GB9254
Others	Dimension	999730mm (LWH)
	Weight	0.3kg
	Connection	5P/9.5mm pitch terminal block
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.