Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet sang Gigabit Quang (Dual fiber, Multi Mode 850nm, SC, 550M) ICP DAS NSM-200SX CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1000Base-T to 1000Base-SX Fiber Media Converter (Multi mode 850nm, SC connector)

THÔNG TIN SẢN PHẨM

Feature

• Provides 1 x 1000 Mbps fiber port with SC type connector for 1000 Base-SX device
• Supports wide operating temperatures from -30 °C ~ +75 °C
• Transparent to jumbo packets up to 10 KB
• Provides Link Fault Pass-through (LFP)
• Supports redundant +12 VDC ~ +48 VDC power input

Introduction

ICP DAS's line of feature rich 10/100/1000 Fiber Media Converters transparently connects copper to multimode or single mode fiber. Our 10/100/1000 Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network, the line of non-fiber based equipment, or the distance between two devices. Gigabit Media Converters are also available with support for LFP (Link Fault Pass-through) feature.

Application

Specifications

LED Indicators
Status	PWR1, PWR2, P-Fail, Link/Act, 100M, 1000M

Ethernet
Ports	1 x RJ-45, 10/100/1000Base-T(X)
Standards	IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
Processing Type	Store & forward, wire speed switching
MAC Table	8K
Memory Bandwidth	10 Gbps
Frame Buffer Memory	1 Mbit
Jumbo Frames	10K
DIP Switch	1 x LFP Enable

Fiber
Ports	1 x 1000Base-FX, SC connector
Mode	Multi-Mode
Fiber Cable	50/125 μm
Distance	0.55 km
Wavelength	850 nm
TX Output	-9.5 dBm Min. -4 dBm Max.
RX Sensitivity	-17 dBm
RX Overload	-3 dBm

Power
Reverse Polarity Protection	Yes
Input Range	+12 VDC ~ +48 VDC Redundant dual Input(Non-isolated)
Redundant Power Inputs	Yes
Consumption	0.1 A @ 24 VDC
Alarm Output	Yes,Relay 1 A @ 30 VDC

Mechanical
Casing	Metal
Dimensions (mm)	DIN-rail mounting: 33 x 120 x 109 (W x L x H) Wall mounting: 33 x 159 x 103 (W x L x H)
Installation	DIN-rail mounting or wall mounting (optional)

Environment
Operating Temperature	-30 °C ~ +75 °C
Storage Temperature	-40 °C ~ +85 °C
Humidity	10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NSM-200SX CR

Industrial 1000 Base-T to 1000 Base-SX Fiber Converter, Multi-mode 850 nm, 0.55 km, SC connector (RoHS)

Bộ chuyển đổi quang điện công nghiệp 1 cổng Gigabit Ethernet sang Gigabit Quang (Dual fiber, Multi Mode 850nm, SC, 550M) ICP DAS NSM-200SX CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng