Card PCI 32 kênh I/O Digital cách ly + 32 kênh I/O Digital TTL ICP DAS PISO-730A
Features
-
Support the + 5 V PCI bus for PISO-730A/730A-5V
-
Support PCI Express x1 for PEX-730A
-
16-channel Optically-isolated Digital Input
-
16-channel Optically-isolated Digital Output (Source, PNP)
-
16-channel 5 V/TTL Digital Output
-
16-channel 5 V/TTL Digital Input
-
3750 Vrms photo-isolation protection
-
Interrupt source: 2 channels
-
Output status readback function for PEX-730A
-
Card ID function for PEX-730A
-
SMD, short card, power saving
-
Supports Plug & Play to obtain I/O resources
-
No more manually setting of I/O address and IRQ
Introduction
The PEX-730A card is the new generation product that ICP DAS provides to meet RoHS compliance requirement. The PEX-730A card is designed as easy replacement for the PISO-730A. Users can replace the PISO-730A by the PEX-730A directly without software/driver modification.
The PISO-730A/730A-5V supports 5 V PCI bus, while the PEX-730A supports PCI Express bus. These cards provide 32 isolated digital I/O channels (16 x DI and 16 x DO) and 32 TTL-level digital I/O channels (16 x DI and 16 x DO). Both the isolated DI and DO channels use a short optical transmission path to transfer an electronic signal between the elements of a circuit and keep them electrically isolated. With 3750 Vrms isolation protection, these DIO channels allow the input signals to be completely floated so as to prevent ground loops and isolate the host computer from damaging voltages. Each digital output offers a PNP transistor and integral suppression diode for the inductive load. The open collector outputs (DO channels) are typically used for alarm and warning notification, signal output control, control for external circuits that require a higher voltage level, and signal transmission applications, etc.
PEX-730A card also add a Card ID switch on-board. Users can set Card ID and then recognize the board by the ID via software when using two or more cards in one computer.
These cards support various OS versions, such as Linux, DOS and 32/64-bit Windows 10/8/7/2008/2003/XP. DLL and Active X control together with various language sample programs based on Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.
Application
-
Factory automation
-
Product test
-
Laboratory automation
Software
-
DOS Lib and TC/BC/MSC sample program (with source codes)
-
DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/2008/7/8/10.
-
VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB sample programs with source codes.
-
LabVIEW toolkit for Windows.
-
Driver for Linux.
Specification
|
Model Name |
PEX-730A |
PISO-730A |
PISO-730A-5V |
|
Isolated Digital Input |
|
Isolation Voltage |
3750 Vrms |
|
Channels |
16 |
|
Compatibility |
Optical |
|
Output Voltage |
Logic 0: 0 ~ 1 V
Logic 1: 9 ~ 24 V
(Logic 1: Min. 7 V; Max. 30 V) |
Logic 0: 0 ~ 1 V
Logic 1: 5 ~ 12 V
(Logic 1: Min. 3.5 V; Max. 16 V) |
|
Input Impedance |
1.2 KΩ, 1 W |
|
Response Speed |
4 kHz (Typical) |
|
Isolated Digital Output |
|
Isolation Voltage |
3750 Vrms |
|
Channels |
16 |
|
Compatibility |
Source (PNP), Open Collector |
|
Output Capability |
100 mA/+30 V for each channel @ 100% duty |
|
Response Speed |
4 kHz (Typical) |
|
Non-isolated Digital Input |
|
Channels |
16 |
|
Compatibility |
5V/TTL |
|
Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
|
Response Speed |
1.2 MHz (Typical) |
|
Non-isolated Digital Output |
|
Channels |
16 |
|
Compatibility |
5V/TTL |
|
Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
|
Output Capability |
Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V |
|
Response Speed |
1.2 MHz (Typical) |
|
General |
|
Bus Type |
PCI Express x 1 |
5 V PCI, 32-bit, 33 MHz |
|
Data Bus |
8-bit |
|
Card ID |
Yes (4-bit) |
No |
|
I/O Connector |
Female DB37 x 1
20-pin box header x 2 |
|
Dimensions (L x W x D) |
163 mm x 110 mm x 22 mm |
180 mm x 105 mm x 22 mm |
|
Power Consumption |
640 mA @ +5 V |
|
Operating Temperature |
0 ~ 60 °C |
|
Storage Temperature |
-20 ~ 70 °C |
|
Humidity |
5 ~ 85% RH, non-condensing |
Download
Manual
Pin
Data sheet
Software
FAQ
Certification
Odering Information
|
PEX-730A CR |
PCI Express, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sourcing) (RoHS)
Includes one CA-4002 D-Sub connector. |
|
PISO-730A |
PCI bus, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sourcing)
Includes one CA-4002 D-Sub connector. |
|
PISO-730A CR |
PCI bus, 32-channel isolated digital I/O & 32-channel TTL digital I/O board. (current sourcing) (RoHS)
Includes one CA-4002 D-Sub connector. |
|
PISO-730A-5V CR |
PCI bus, 32-channel isolated digital I/O (Input Logic High: 5~12 V) & 32-channel TTL digital I/O board. (current sourcing) (RoHS)
Includes one CA-4002 D-Sub connector. |
Accessories
|
CA-2002 |
20-pin flat cable,20 cm x 2 |
|
CA-2010 |
20-pin flat cable,1 M |
|
CA-2020 |
20-pin flat cable 2 M |
|
CA-3710 |
DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
|
CA-3710D |
DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
|
CA-3715DM-H |
DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
|
CA-3730DM-H |
DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
|
CA-3750DM |
DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
|
CA-3750DM-H |
DB-37 Male-Male Cable, 5.0 M, 180°. (RoHS) |
|
CA-4002 |
37-pin Male D-sub connector with plastic cover. |
|
DB-37 |
Directly connect signal to D-sub 37-pin connector |
|
DN-37 |
DIN Rail Mounting 37-pin Connector |
|
DN-20 |
Two 20-pin header DIN-rail terminal board |
|
DB-16P |
16-channel isolated D/I board |
|
DB-16R |
16-channel relay board |
|
ADP-20/PCI |
20-pin extender |
