Switch công nghiệp mạch vòng 5 cổng Ethernet ICP DAS RSM-405A CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

5-Port Real-time Redundant Ring Switch with metal case (+12 ~ +48 VDC, non-isolation)

Gọi +84 904251826 để được trợ giúp

Switch công nghiệp mạch vòng 5 cổng Ethernet ICP DAS RSM-405A CR

Feature

• Automatic MDI / MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Store-and-forward architecture
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• 3.2 Gbps high performance memory bandwidth
• Frame buffer memory : 1 Mbit
• 2048 MAC addresses
• Redundant Power Inputs +12 ~ +48 VDC Power failure alarm by relay output
• Supports operating temperatures from -40°C ~ +75°C
• DIN-Rail Mounting or Wall Mounting

Introduction

The RSM-405A is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. RSM-405A supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms – for the majority of applications a seamless process. The RSM-405A is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work. The RSM-405A provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RSM-405A 's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.

Application

Specifications

LED Indicators
Status Power, 10/100M, Link/Act, Master
Ethernet
Ports 5 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, IEEE 802.3u, IEEE802.3x
Processing Type Store & forward wire speed switching
MAC Table 2048
Memory Bandwidth 3.2 Gbps
Frame Buffer Memory 1 Mbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Protocol Modbus/RTU, Modbus/TCP
Redundant Strategy STP, Ring (ICP DAS)
Isolation 1500 Vrms 1 minute
DIP Switch Yes,
1x Redundancy mode confi guration
1x Max. Recovery time selection
COM Ports
Ports 1 x RS-232/RS-485
Power
Reverse Polarity Protection Yes
Input Range +12 ~ +48 VDC (Non- Isolation,redundant input)
Consumption 0.22 A @ 24 VDC, +/-5% arrowed with 100M Full duplex
Alarm Output Yes
Mechanical
Casing Metal
Dimensions (mm) DIN-rail mounting: 73 x 118 x 103 (W x L x H)
Wall mounting: 73 x 132 x 103 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP30
Environment
Operating Temperature -40 °C ~ + 75 °C
Storage Temperature -40 °C ~ + 85 °C
Humidity 10 ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

RSM-405A     CR  5-Port Real-time Redundant Ring Switch with metal case (+12 ~ +48 VDC, non-isolation)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: