Switch công nghiệp mạch vòng 3 cổng Ethernet + 2 cổng Quang (Dual fiber, Single Mode, SC, 30KM) ICP DAS RSM-405AFCS-T CR
Feature
• Automatic MDI/MDI-X crossover for plug-and-play
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure fl ow control
• 3.2 Gbps high performance memory bandwidth
• Supports operating temperatures from -30°C ~ +75°C
• Redundant Power Inputs +12 VDC ~ +48 VDC
• Power failure alarm by relay output
• Modbus remote monitoring
• Supports Modbus OPC Server
• Store-and-forward architecture
• Built-in Cyber-Ring redundant technique
• Frame buffer memory: 512 Kbit
• 1024 MAC addresses
• Single-mode, SC Connector Fiber supports
• DIN-Rail Mounting or Wall Mounting
Introduction
The RSM-405AFCS-T is a 5-Port Industrial Ethernet (10/100Base-TX) Real-Time Redundant Ring Switch. The RSM-405AFCS-T supports 10/100M auto-negotiation feature and auto MDI /MDIX function. It can automatically switch the transmission speed (10 Mbps or 100 Mbps) for corresponding connections. The connectors of Ethernet port are shielded RJ-45. The shielded RJ-45 connectors offer a high reliability Ethernet environment for industrial control and automation. Built-in ICP DAS Cyber-Ring technique that enable multiple switches to be placed into a redundant ring. Typically it detects and recovers from a copper link failure within approximately 20 ms V for the majority of applications a seamless process. The RSM-405AFCS-T is much more easy to use and absolutely free of software setting. After unpacking from the shipping case, it just takes one or two dip or rotary switch to make it work. The RSM-405AFCS-T provides two power inputs that can be connected simultaneously to live DC power sources. If one of the power inputs fails, the other live source acts as a backup to automatically support the RSM-405AFCS-T 's power needs. And, the relay output facility can deliver warning signal while dual power or network link failure.
Specifications
| LED Indicators |
| Status |
10/100M, Link/Act/Backup, Full duplex/Half duplex (Fiber Port) |
| Ethernet |
| Ports |
3 x RJ-45, 10/100Base-TX |
| Standards |
IEEE 802.3, IEEE 802.3u, IEEE802.3x |
| Processing Type |
Store & forward wire speed switching |
| MAC Table |
1024 |
| Memory Bandwidth |
3.2 Gbps |
| Frame Buffer Memory |
512 Kbit |
| Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Protocol |
Modbus/RTU, Modbus/TCP |
| Redundant Strategy |
STP, Ring (ICP DAS) |
| Isolation |
1500 Vrms 1 minute |
| DIP Switch |
Yes,
1x Redundancy mode confi guration
1x Max. Recovery time selection |
| Fiber |
| Ports |
2-port 100 Base-FX
SC connector |
| Mode |
Single-Mode |
| Fiber Cable |
8.3/125, 8.7/125, 9/125 or 10/125 gm |
| Distance |
30 km, (9/125 gm recommended) for full duplex |
| Wavelength |
1300 or 1310nm |
| TX Output |
-15 dBm Min.
-8 dBm Max. |
| RX Sensitivity |
-34 dBm |
| RX Overload |
-5 dBm |
| Budget |
19 dBm |
| COM Ports |
| Ports |
1 x RS-232/RS-485 |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
+12 ~ +48 VDC (Isolation, redundant input) |
| Redundant Power Inputs |
Yes |
| Consumption |
0.4 A @ 24 VDC |
| Alarm Output |
Yes,Relay 2 A @ 30 VDC |
| Mechanical |
| Casing |
Metal |
| Dimensions (mm) |
DIN-rail mounting: 73 x 118 x 105 (W x L x H)
Wall mounting: 73 x 132 x 105 (W x L x H) |
| Installation |
DIN-rail mounting or wall mounting |
| Ingress Protection Rating |
IP30 |
| Environment |
| Operating Temperature |
-30 °C ~ + 75 °C |
| Storage Temperature |
-40 °C ~ + 85 °C |
| Humidity |
10 ~ 90% RH, non-condensing |
Datasheet
Documents
Ordering Information
| RSM-405AFCS-T CR |
5-Port Real-time Redundant Ring Switch with 2-Fiber Port, Single Mode, SC Connector with metal case (+12 ~ +48 VDC) (RoHS) |
