Module lập trình nhúng Wise IoT 3 kênh Thermistor + 4 kênh DO ICP DAS WISE-7105 CR
Tính năng
Giới thiệu
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development.
WISE-7105 follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7105 will still be able to receive power from auxiliary power sources like AC adapters or battery, etc.
This multi-function module WISE-7105 supports Modbus/TCP protocol to make seamless integration with SCADA software available. It features 16-bit, 8-channel Thermistor inputs and 4-channel digital outputs. Each analog channel is allowed to configure an individual range.
Thông số kỹ thuật
Software | |
---|---|
Protocol | • Modbus TCP • CGI Command (Sending) |
Function | • Web Interface for Configuration • IF-THEN-ELSE Logic operation (36 rule supported) • I/O channel monitoring and control • Timer operation (12 set supported) • Internal Register operation (48 set supported) • Recipe operation (12 set supported) • Advanced P2P (8 set supported) • non-SSL Email sending function |
CPU Module | |
---|---|
CPU | 16-bit CPU (80 MHz) |
Isolation | |
---|---|
Intra-module Isolation | 2500 VDC |
EMS Protection | |
---|---|
EFT (IEC 61000-4-4) | ±4 kV for Power Line |
ESD (IEC 61000-4-2) | ±4 kV Contact for each terminal and ±8 kV Air for random point |
LED Indicators | |
---|---|
Status | 1 x PoE Power 1 x System Running 1 x Ethernet Link/Act 1 x Ethernet 10/100M Speed |
Analog Input | |
---|---|
Channels | 8 (Differential) |
Type | Thermistor (Precon ST-A3, Fenwell U, YSI L100, YSI L300,YSI L1000, YSI B2252, YSI B3000, YSI B5000,YSI B6000, YSI B10000, YSI H10000,YSI H30000) |
Resolution | 16-bit |
Accuracy | ±0.1% or better |
Sampling Rate | 10 Sample/Sec. (Total) |
Common Mode Rejection | 86 dB |
Normal Mode Rejection | 100 dB |
Overvoltage Protection | 110 VDC/VAC |
Individual Channel Configuration | Yes |
Open Wire Detection | Yes |
Zero Drift | ±20 μV/°C |
Span Drift | ±25 ppm/°C |
Digital Output | |
---|---|
Channels | 4 |
Type | Isolated Open Collector |
Sink/Source (NPN/PNP) | Sink |
Load Voltage | +5 VDC ~ +50 VDC |
Load Current | 700 mA/Channel |
Overvoltage Protection | 60 VDC |
Overload Protection | 1.4 A |
Short-circuit Protection | Yes |
Ethernet | |
---|---|
Ports | RJ-45 x 1, 10/100 Base-TX and automatic MDI/MDI-X |
PoE | Yes |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | 12 ~ 48 VDC |
Consumption | 3.0 W |
Powered from PoE | Yes, IEEE 802.3af, Class 1 |
Powered from Terminal Block | Yes, 12 ~ 48 VDC |
Mechanical | |
---|---|
Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
Installation | DIN-Rail Mounting/Wall Mounting |
Environment | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -30 ~ +80 °C |
Humidity | 10 ~ 90% RH, Non-condensing |
Download
Thông tin mua hàng
WISE-7105 CR | Intelligent I/O Module with 8-ch Thermistor Input, 4-ch DO and PoE (RoHS) |