Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ2-axis Stepper/Servo Motion Control Terminal Borad ICP DAS DN-8237UB CR
Features
• High Speed Photo-coupling Isolated.
• Supporting Pulse Command Type Step Motors or Servo Motors.
• Providing Power LED and Other Status LEDs (Home, Limit Switches, …)
• Providing FRnet Terminal for High-speed Serial I/O Expansion when the Controller Supports FRnet.
Introduction
The DN-8237 series is a daughter-board that is designed for ICP DAS’s 2-axis motion controllers, such as I-8092F and PISO-PS200. And they are for different motor drivers, such as general purpose usage, Mitsubishi and Panasonic motor amplifier. It is a not only a screw terminal board for easy connection of signals; it also provides onboard isolating circuitry to protect the controllers. Interface signals are divided into four groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, special purpose inputs (Home, near home, limit -switches) and a servo-enable output. Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains onboard power module which provides different voltages for other onboard circuitry. And this power module accepts wide range input power (20 ~ 26 VDC).
Specification
| Power | |
|---|---|
| Input Range | 20 ~ 26 VDC, 0.5 A |
| Consumption | 12 W (24 VDC) |
| Mechanical | |
|---|---|
| Dimensions (mm) | 110 mm X 107 mm |
| Environmental | |
|---|---|
| Operating Temperature | -20 ~ +75 °C |
| Storage Temperature | -30 ~ +85 °C |
| Humidity | 10 ~ 90% RH, Non-condensing |
Download
Ordering information
| DN-8237UB CR | Universal Snap-on Wiring Terminal Board |
