Module RS-485 Modbus RTU 4 kênh đầu vào số DI+4 kênh đầu ra Relay ICP DAS M-7060P-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

4-ch Isolated (Wet, 10~50 VDC) DI and 4-ch Power Relay Module

THÔNG TIN SẢN PHẨM

Features

4 Sink- or Source-type Digital Inputs
2 Form A and 2 Form C Signal Relay Outputs
Digital Input Channels Can be Used as 16-bit Counters
Configurable Power-on Value and Safe Value Settings
Built-in Dual Watchdog

Introduction

M-7060/M-7060D provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while M-7060P/M-7060PD provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels are also able to be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. M-7060D/PD provides eight LED indicators for channel status monitoring.

M-7060(D)/M-7060P(D) supports Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. M-7060(D) is the ideal solution for small signal-switching applications, while M-7060P(D) is the perfect solution for high-power applications.

Applications

• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment

Specifications

CPU Module
Watchdog Timer	Module, Communication (Programmable)

Isolation
Intra-module Isolation	3750 VDC

EMS Protection
EFT (IEC 61000-4-4)	±4 kV for Power Line
ESD (IEC 61000-4-2)	±4 kV Contact for Each Terminal ±8 kV Air for Random Point
Surge (IEC 61000-4-5)	±3 kV for Power Line

LED Indicators
Status	1 x Power and Communication

Digital Input/Counter
Channels	4
Type	Wet Contact
Sink/Source (NPN/PNP)	Sink/Source
ON Voltage Level	+4 VDC Max.
OFF Voltage Level	+10 ~ +50 VDC
Max. Counts	65535 (16-bit)
Frequency	100 Hz
Min. Pulse Width	5 ms
Input Impedance	10 kΩ
Overvoltage Protection	±70 VDC

Relay Output
Channels	4 (2 x Form A, 2 x Form C)
Type	Power Relay
Contact Material	Silver Tin Alloy
Contact Rating	Form A: 16 A @ 250 VAC 10 A @ 30 VDC Form C: NO: 10 A @ 250 VAC NC: 6 A @ 250 VAC
Operate Time	10 ms
Release Time	5 ms
Electrical Endurance	1 x 10^5 ops.
Mechanical Endurance	1 x 10^7 ops.
Surge Strength	2500 VDC
Power on Value	Programmable
Safe Value	Programmable

COM Ports
Ports	1 x RS-485
Baud Rate	1200 ~ 115200 bps
Data Format	(N, 8, 1), (N, 8, 2), (E, 8, 1), or (O, 8, 1)
Protocol	Modbus RTU, DCON

Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	1.4 W

Mechanical
Dimensions (mm)	123 x 72 x 35 (W x L x H)
Installation	DIN-Rail Mounting

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	10 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

M-7060P-G CR

4-ch Isolated (Wet, 10~50 VDC) DI and 4-ch Power Relay Module using DCON and Modbus Protocols (Gray Cover) (RoHS)

Module RS-485 Modbus RTU 4 kênh đầu vào số DI+4 kênh đầu ra Relay ICP DAS M-7060P-G CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng