|
Software |
|
Switching |
Support 802.1Q VLAN, VLAN based on MAC/IP subnet/protocol/stream, VLAN translation, PVLAN
Support port configuration, such as port speed, duplex mode, flow control, maximum transmission unit, and etc.
Support port speed limit, storm suppression, storm detection, and port statistics
Support port aggregation, static aggregation, dynamic aggregation LACP
Support MAC address aging and learning limitations, static MAC address binding |
|
TSN |
IEEE 802.1AS (generalized PTP, gPTP)
IEEE 802.1Qbu (Frame Preemption, FP)
IEEE 802.1Qbv (Time-Aware Shaper, TAS)
IEEE 802.1Qci (Per-Stream Filtering and Policing, PSFP)
IEEE 802.1CB (Frame Replication and Elimination for Reliability, FRER) |
|
Redundancy |
Support fast ring network MW-Ring private protocol
Support ERPSv1/v2
Support STP/RSTP/MSTP
Support loop back detection |
|
Multicast |
Support IGMP Snooping
Support multicast filtering |
|
Security Management |
Support HTTPS, SSH service control, HTTP/HTTPS, SNMP, TELNET/SSH access management
Support privilege level and port security
Support 802.1X port authentication, AAA authentication, radius, TACACS+ protocols
Support source IPv4/IPv6 protection and ARP protection
Support ACL and filters data from L2-L4 layers |
|
Management and Maintenance |
Support IEEE 1588v2 (Precision Time Protocol, PTP)
Support QoS, SP, DWRR queue scheduling
Support DHCPv6 clients, DHCPv4 clients/servers/listeners/relays
Support SNMPv1/v2c/v3, SNMP Trap v1/v2c/v3, RMON, LLDP, LLDP MED
Support port mirroring, DDM, Ping IPv4/IPv6, Traceroute IPv4/IPv6
Support user permission management, logging, NTP client, and daylight saving time
Support configuration file upload/download/activation/deletion, dual mirror backup, restart, and factory reset |
|
Switch Capability |
|
Processing Type |
Store-and-Forward |
|
Backplane Bandwidth |
23Gbps |
|
Buffer Size |
1.25Mbit |
|
Mac Address Table |
8K |
|
Interface |
|
1G Fiber Port |
2×1000Base-X SFP ports |
|
1G Copper Port |
6×10/100/1000Base-T(X) auto-sensing RJ45 ports, support full/half duplex and auto MDI/MDI-X |
|
Relay |
1 relay alarm output, 5.08mm pitch 3-pin terminal block |
|
CONSOLE |
1 console port with RS232 signal on a RJ45 connector, used for device debugging |
|
Button |
One-click restart or restore the factory settings |
|
Indicator Light |
Power indicator, operation indicator, alarm indicator, optical port indicator, TSN indicator light, ring indicator, TX port speed and connection/activity indicator |
|
Power Supply |
MISCOM7208TSN-2GF-6GT |
MISCOM7208TSN-2GF-6GT-AD220 |
|
Input Voltage |
Dual DC9~60V power input, non-polarity |
Single AC85~264V/DC110~370V power supply |
|
Power Consumption |
＜12W@DC12V(full load) |
＜12W@AC220V |
|
Connection |
5.08mm pitch 5-pin terminal block |
|
Protection |
Built-in over-current protection |
|
Physical Characteristics |
|
Dimensions |
160×58×122 mm (DIN rail mounting clip excluded) |
|
Installations |
Easy installation on 35mm DIN rails |
|
IP Code |
IP40 |
|
Weight |
DC model is about 0.86kg and AC model is about 0.9kg |
|
Working Environment |
|
Operating Temp |
-40℃~+75℃ |
|
Storage Temp |
-40℃~+85℃ |
|
Relative Humidity |
5%~95% (non-condensing) |
|
Industry Standard |
MISCOM7208TSN-2GF-6GT |
MISCOM7208TSN-2GF-6GT-AD220 |
|
EMC |
IEC 61000-4-2 (ESD): Level 4
- Contact discharge ± 8kV
- Air discharge ± 15kV
IEC 61000-4-5 (Surge): Level 4
- Power supply: common mode ± 4kV, differential mode ± 2kV
- Ethernet port: common mode ± 4kV, differential mode ± 2kV
IEC 61000-4-4(EFT): Level 4
- Power supply: ± 4kV
- Ethernet port: ± 2kV
|
IEC 61000-4-2 (ESD): Level 4
- Contact discharge ± 8kV
- Air discharge ± 15kV
IEC 61000-4-5 (Surge): Level 3
- Power supply: common mode ± 2kV, differential mode ± 2kV
- Ethernet port: common mode ± 4kV, differential mode ± 2kV
IEC 61000-4-4(EFT): Level 4
- Power supply: ± 4kV
- Ethernet port: ± 2kV
|
|
Certification |
CE, FCC, RoHS |
