Bộ chuyển đổi CAN sang Ethernet Wi-Fi ICP DAS I-7540D-WF CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

CAN to Wi-Fi Converter (Asia Only)

THÔNG TIN SẢN PHẨM

Feature

IEEE 802.11b/g compliant
Wireless data transmission via WLAN
Two different operation modes: infrastructure and ad-hoc
point to point or point to multi-points connection via wireless LAN
Supports WEP, WPA and WPA2 encryption for wireless LAN
CAN 2.0A/2.0B compliant
Connect CAN networks via a WLAN bridge
Communication efficiency: one-way is up to 700 fps (client->server, server->client)，two-way 350 fps (client<=>server)
Wireless transmission distance: up to 100 meters

Introduction

The I-7540D-WF supports the wireless transmission of CAN data between a CAN network and a WLAN network according to the 802.11b/g standard. It provides CAN to WLAN converter functionality together with wireless transparent transmission on the CAN network. The I-7540D-WF is highly suitable for connecting mobile (e.g., vehicles or machines) or stationary CAN networks and is often used in short ranges up to 100 m. Using an appropriately configured router, CAN data can be determined to pass or filter from the CAN networks to the Ethernet. The wireless connection that is established between two I-7540DWF units can be used instead of a cable, and enables the connection of CAN networks that would otherwise be difficult to link such as rotational machineries.

Application

Factory Automation
Building Automation
Home Automation
Control System
Monitor System
Vehicle Automation

Specifications

LED Indicators
Status	1 x Power 1 x Wi-Fi 1 x CAN 1 x WLAN 1 x TCP connection

Wi-Fi
Transmission Distance (LoS)	100 m
Standard	IEEE 802.11b/g
RX Sensitivity	-87dBm @802.11b / -72dBm @802.11g
Output Power	14dBm @802.11b / 12dBm @802.11g
Operation Mode	Infrastructure & Ad-hoc
Frequency	2.412GHz ~ 2.484GHz
Encryption	WEP, WPA and WPA2
Antenna	5 dBi (Omni-Directional)

COM Ports
Ports	1 x RS-232 (10-pin screw terminal block (TXD, RXD, GND))
Baud Rate	115200

CAN
Controller	CAN Controller inside
Ports	1
Baud Rate	5 k ~ 1 M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Selectable 120Ω terminal resistor by jumper
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B
Filter	Yes
Pin Assignment	10-pin screw terminal connecter
Data Flow	700 fps(peak value, one-way)

Power
Input Range	+10 VDC ~ +30 VDC
Consumption	1.5 W

Mechanical
Casing	Plastic
Dimensions (mm)	76 x 117 x 37 (W x L x H)
Installation	DIN-Rail

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-7540D-WF CR

CAN to Wi-Fi Converter (RoHS) (Asia Only)

Bộ chuyển đổi CAN sang Ethernet Wi-Fi ICP DAS I-7540D-WF CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng