Module 1 cổng CAN ICP DAS I-9120 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-port CAN Programmable Module

THÔNG TIN SẢN PHẨM

Feature

Common Features

Support WP-9000-CE7、XP-9000-WES7、LP-9000、LX-9000
Allow user to program user-defined firmware in I-9120

CAN Port Features

2500 Vrms photo-isolation protection on CAN side
Compatible with CAN specification 2.0 parts A and B
Provide default baud rate: 10k, 20k, 50k, 125k, 250k, 500k, 800 k, 1 M bps
Allow user-defined baud rate
Cyclic transmission precision: ±0.5ms precision when cyclic time is below 10ms , ±1% error when cyclic time exceeds 10ms
Provide 5 sets of cyclic transmission

Software Utility Features

Utility tool for downloading user-defined firmware and updating default firmware
Provide VC6, VC++ 2005, C#.net 2005, VB.net 2005 demos and library

Introduction

The CAN (Controller Area Network) is a serial communication bus especially suited to interconnect smart devices to build smart systems or sub-system. It efficiently supports distributed real-time control with high level security. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, I-9120 with 9000 series PAC (Programmable Automation Controller) represents a cost-effective CAN solution. It has one CAN communication port with 5-pin screw terminal connector, which can be used in a wide range of CAN applications. I-9120 provides CAN 2.0A and 2.0B specific, 10kbps to 1Mbps CAN baud rate, re-transmission function, bus arbitration and error detection.

Combining the benefits of 9000 series PAC which can be operated without increasing the CPU loading heavily, it could be a powerful multi CAN port programmable device server by driving the program in the 186 CPU of I-9120. It can also communicate with other communication interface, such as RS-232/RS-485/Ethernet ports and functions as a programmable device server. Therefore, users can design a variety of applications between different communication protocols.

Application

Energy Storage System

Specifications

Software
Driver	WP-9000-CE7、XP-9000-WES7、LP-9000、LX-9000
SDK	VC6, VC++ 2005, C#.net 2005, VB.net 2005, Linux

CPU Module
CPU	80186, 80 MHz or compatible
EEPROM	16 KB
Flash	512 KB
SRAM	512 KB
Watchdog Timer	Watchdog IC

LED Indicators
Status	1 x Power 1 x CAN status 1 x Operating mode

CAN
Controller	NXP SJA1000T with 16 MHz clock
Baud Rate	10 k ~ 1 M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Switch for 120 Ω terminal resistor
Specification	ISO-11898-2, CAN 2.0A and CAN 2.0B

Power
Consumption	1.5 W

Mechanical
Dimensions (mm)	31 x 91 x 115 (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-30 ~ +80 °C
Humidity	10 ~ 90% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-9120 CR

1-port Programmable CAN Module (Parallel Bus Type) (RoHS)

Module 1 cổng CAN ICP DAS I-9120 CR

Common Features

CAN Port Features

Software Utility Features

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng