Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đSwitch công nghiệp quản lý 4 cổng Ethernet + 4 cổng quang 3Onedata IES618-4F-P220
IES618 series are layer 2 managed industrial Ethernet switches. This series provides 6 types of products and support different combination schemes of copper port and fiber port, which can meet the requirements of different application scenes.
Network management system supports various network protocols and industrial standards, such as STP/RSTP, ERPS, 802.1Q VLAN, QoS Function, Port Trunking, Port Mirroring, LLDP, 802.1X. It also possesses complete management functions, including Port Configuration, Port Statistics, Access Control, Network Diagnosis, Rapid Configuration, Online Upgrading and so on, and supports CLI, WEB, Telnet, SNMP and other access methods. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
DIP switch can achieve restoring factory defaults. When DC power supply or port has link failure, ALM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. Hardware adopts fanless, low power consumption, wide temperature and voltage design and has passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in smart grid, rail transit, smart city, safety city, new energy, intelligent manufacturing and other industrial fields.
Tính năng
Thông số kỹ thuật
|
Standard & Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3x for Flow Control IEEE 802.1D-2004 for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1AB for LLDP IEEE 802.1X for 802.1X Authentication ITU-T G.8032 for ERPS |
|||||||||||||||||||||
|
Management |
Console/Telnet/WEB management method, SNMP v1/v2c Centralized Management of Equipment, Port Mirroring, QoS, LLDP, File Management, Port Statistics |
|||||||||||||||||||||
|
Security |
User privilege classification, Relay Alarm (Port Alarm and Power Alarm), IEEE802.1X, Threshold Alarm, Loop Protection |
|||||||||||||||||||||
|
Switch Function |
802.1Q VLAN, Static Port Aggregation, Bandwidth Management, Flow Control |
|||||||||||||||||||||
|
Unicast / Multicast |
IGMP Snooping |
|||||||||||||||||||||
|
Redundancy Technology |
SW-Ring, ERPS, STP/RSTP |
|||||||||||||||||||||
|
Interface |
Copper port: 10/100Base-T(X), RJ45, Automatic Flow Control, Full/Half Duplex Mode, MDI/ MDI-X Autotunning Fiber port: 100Base-FX, optional SC/ST/FC Console port: CLI command line management port (RS-232), RJ45 Alarm port: 2-pin 7.62mm pitch terminal blocks, support 1 relay alarm output, current load capability is 1A@24VDC or 0.5A@120VAC |
|||||||||||||||||||||
|
Indicator |
Running Indicator, Port Indicator, Power Supply Indicator, Alarm Indicator |
|||||||||||||||||||||
|
Switch Property |
Transmission mode: store and forward MAC address: 16K Buffer: 4Mbit Backplane bandwidth: 5.6G Switch time delay: <10μs |
|||||||||||||||||||||
|
Power Supply |
DC power: 12/24/48VDC (12~60VDC), redundant dual power input, built-in overcurrent protection, support non-polarity AC power: 220 VAC/DC (85 ~ 264 VAC/DC), with built-in overcurrent protection |
|||||||||||||||||||||
|
Power Consumption |
|
|||||||||||||||||||||
|
Working Environment |
Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 0%～95% (no condensation) |
|||||||||||||||||||||
|
Physical Characteristic |
Housing: IP40 protection, high-strength corrugated metal Installation: DIN-Rail or wall mounting Dimension (W x H x D): 53mm×138mm×110mm Weight: 670g |
|||||||||||||||||||||
|
Industrial Standard of AC Product |
IEC 61000-4-2 (ESD), Level 3
IEC 61000-4-4 (EFT)，Level3
IEC 61000-4-5 (Surge)，Level 3
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
|||||||||||||||||||||
|
Industrial Standard of DC Product |
IEC 61000-4-2 (ESD), Level 4
IEC 61000-4-4 (EFT)，Level4
IEC 61000-4-5 (Surge)，Level 4
Shock: IEC 60068-2-27 Free fall: IEC 60068-2-32 Vibration: IEC 60068-2-6 |
|||||||||||||||||||||
|
Authentication |
CE, FCC, RoHS, UL62368 |
Download
Thông tin đặt hàng
Layer 2, 4*10/100Base-T(X) RJ45 + 4*100M SC (single-mode, 20KM), single power supply 85~264VAC/DC, DIN-Rail mounting
