Bộ lặp và cách ly CAN Bus ICP DAS I-7531-G CR
Feature
Introduction
The I-7531 is an isolated CAN repeater that can be used to establish a physical coupling of two segments of a CAN bus system. This module is designed to isolate the noise and disturbance between the two CAN ports of the I-7531. When the CAN signal is decayed because of the rough bus cable or noise, the I-7531 can recover the shape of the CAN signals to the original ones. Tree topologies can be implemented as well as long drop lines using the I-7531. In order to use the I-7531 easily, the module can automatically adjust the baud rate by itself to match the CAN network. Users just connect the I-7531 with the CAN buses, check the terminal resistor and power it on, subsequently the I-7531 enable to work normally. For detail information , please refer to the user manual of I-7531.
Application
• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition
Specifications
Fiber | |
---|---|
Propagation Delay | 200 ns |
CAN | |
---|---|
Ports | 2 |
Baud Rate | 5 k ~ 800 k bps |
Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
Terminal Resistor | Jumper for 120 Ω terminal resistor |
Specification | ISO-11898-2, CAN 2.0A and CAN 2.0B |
Time Delay | 200ns |
Power | |
---|---|
Input Range | +10 VDC ~ +30 VDC |
Consumption | 2 W |
Mechanical | |
---|---|
Casing | Plastic |
Dimensions (mm) | 72 x 118 x 33 (W x L x H) |
Installation | DIN-Rail |
Environment | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -30 ~ +80 °C |
Humidity | 10 ~ 90% RH, Non-condensing |
Download
Ordering Information
I-7531-G CR | CAN Bus Isolated Repeater (RoHS) |