Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đCard PCI Express 2 cổng CAN ICP DAS PEX-CAN200i-D CR
Features
• PCI Express Interface
• Compatible with CAN 2.0 parts A and B
• Fully compatible with ISO 11898-2 standard
• Support CAN bard from 10K to 1M bps
• 2500 Vrms photo couple isolation on the CAN bus
• 33 MHz, 32 bit, X1 PCI Express bus (It can be plugged into the PCI-Express x1, x4, x8, or x16 slot)
• Build-in jumper to select 120 ohm terminal resister
• 3KV galvanic isolation
• 2 independent CAN channels
• Direct memory mapping to the CAN controller
• Provide VB, VC++, Delphi, BC++ demos
Introduction
PEX-CAN200i can represents an economic solution of an active CAN board with express PCI bus. It has 2 independent CAN bus communication ports with 5-pin screw terminal connector or 9-pin D-sub connector, and has the ability to cover a wide range of CAN applications. Besides, PEX-CAN200i uses the new CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function.
Application
• CAN bus communication application
• DeviceNet, CANopen, CAN J1939, SDS(System Wide Network) protocol application
• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition
Specifications
| Software | |
|---|---|
| Driver | Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 4.8.0, LabView, DASYLab, InduSoft |
| Library | VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net |
| PC Bus | |
|---|---|
| Type | 33 MHz, 32 bit, X1 PCI Express bus |
| CAN | |
|---|---|
| Controller | NXP SJA1000T with 16 MHz clock |
| Transceiver | NXP 82C250 |
| Ports | 2 |
| Baud Rate | 10 k ~ 1 M bps |
| Isolation | 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple |
| Terminal Resistor | Jumper for 120 Ω terminal resistor |
| Power | |
|---|---|
| Consumption | 100 mA @ 12 V, 100 mA @ 3.3 V |
| Mechanical | |
|---|---|
| Dimensions (mm) | 120 x 85 x 22 (W x L x D) |
| Environmental | |
|---|---|
| Operating Temperature | 0 ~ +60 °C |
| Storage Temperature | -20 ~ +70 °C |
| Humidity | 5 ~ 85% RH, Non-condensing |
Download
Ordering information
| PEX-CAN200i-D CR | 2-port Isolated Protection CAN PCI Express Card with 9-pin D-sub connector (RoHS) |
