Bộ chuyển đổi 1 cổng RS-422/485 sang Ethernet ICP DAS DS-715 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Serial-to-Ethernet Device Server with 1-port Isolated RS-422/485

THÔNG TIN SẢN PHẨM

Feature

Incorporate Serial Devices in an Ethernet network
"Virtual COM" Extend COM Ports
Application Modes: Virtual COM, TCP Server, TCP Client
VxComm Utility supports 32/64-bit Windows 7 SP1/10/2012/2016
High Performance Device Server
Watchdog Timer suitable for use in harsh environments
Power Reverse Polarity Protection
Serial Port +/-4 kV ESD Protection Circuit
Built-in High Performance MiniOS7 from ICP DAS
10/100 Base-TX Ethernet, RJ-45 Port (Auto-negotiating, auto MDI/MDI-X, LED indicator)
Low power consumption
Palm-Sized

Introduction

The DS-700 is a series of Serial-to-Ethernet Device Servers that are designed for linking RS-232/422/485 devices to an Ethernet network. By using the VxComm Driver/Utility, the built-in COM port of the DS-700 series can be virtualized to a standard PC COM port in Windows. By virtue of its protocol independence, a small size and flexibility, the DS-700 series meets the demands of virtually any network-enabled application.

The DS-712 is equipped with a male DB-9 connector and supports a 5-wire RS-232 port, while the DS-715 is equipped with a removable terminal block connector and supports a 4-wire RS-422 port or a 2-wire RS-485 port with 2000 Vrms isolation.

Application

• Factory Automation
• Building Automation
• Home Automation

Specifications

CPU Module
CPU	80186-80 MHz or compatible
EEPROM	16 KB; Data return: 40 years.
Flash	512 KB
SRAM	512 KB
Watchdog Timer	Yes

LED Indicators
Status	1 x Power 2 x Ethernet

COM Ports
Ports	1 x RS-485/RS-422
Baud Rate	115200 bps Max.
Bias Resistor	Yes, 1 KΩ
Parity	None, Even, Odd, Mark, Space None parity is required when using 8 data bits and 2 stop bits on COM1.
Data Bit	7, 8: for COM1
Stop Bit	1, 2: for COM1
Node Address	254 (max.)

Ethernet
Ports	10/100 Base-TX, RJ-45 port (Auto-negotiating, auto MDI/MDI-X, LED indicator)

Power
Reverse Polarity Protection	Yes
Consumption	2.0 W
Powered from Terminal Block	12 VDC ~ +48 VDC (non-regulated)

Mechanical
Casing	Plastic
Dimensions (mm)	72 mm x 124 mm x 35 mm (W x H x D)
Installation	DIN-Rail or Wall mounting

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +80 °C
Humidity	5 ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

DS-715 CR

Serial-to-Ethernet Device Server with 1-port Isolated RS-422/485 (RoHS)

Bộ chuyển đổi 1 cổng RS-422/485 sang Ethernet ICP DAS DS-715 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng