Module Ethernet Modbus TCP 10 kênh AI Thermocouple + 6 kênh DO ICP DAS ET-7019Z/S2 CR
Features
Introduction
The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7019Z/PET-7019Z/ET-7219Z/PET-7219Z is specifically designed for extremely accurate thermocouple measurement and features automatic coldjunction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.
Specification
CPU Module | |
---|---|
Watchdog Timer | Yes, Module (0.8 second), Communication (Programmable) |
EMS Protection | |
---|---|
EFT (IEC 61000-4-4) | ±4 kV for Power Line |
ESD (IEC 61000-4-2) | ±4 kV Contact for Each Terminal ±8 kV Air for Random Point |
LED Indicators | |
---|---|
Status | 1 x Power, 2 x Ethernet |
Software | |
---|---|
Built-in Web Server | Yes |
Analog Input | |
---|---|
Channels | 10 (Differential) |
Type | Voltage Current Thermocouple |
Temperature Output Consistency | Yes |
Stable Temperature Output in the Field | Yes |
Range | ±15 mV, ±50 mV, ±100 mV, ±150 mV, ±500 mV, ±1 V, ±2.5 V, ±5 V, ±10 V, ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Requires Optional External 125Ω Resistor) Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710) |
Resolution | 16-bit |
Accuracy | ±0.1% of FSR or better |
Sampling Rate | 10 Samples/Second (Total) |
Input Impedance | >300 kΩ |
Common Mode Rejection | 86 dB Min. |
Normal Mode Rejection | 100 dB |
Overvoltage Protection | 240 Vrms |
Individual Channel Configuration | Yes |
Open Wire Detection | Yes |
Zero Drift | ±0.5 μV/°C |
Span Drift | ±25 ppm/°C |
Isolation | ±400 VDC, Virtual Channel to Channel Isolation |
Digital Output | |
---|---|
Channels | 6 |
Type | Isolated Open Collector |
Sink/Source (NPN/PNP) | Sink |
Load Voltage | 5 VDC ~ 50 VDC |
Max. Load Current | 700 mA/Channel |
Overvoltage Protection | 60 VDC |
Overload Protection | 1.4 A |
Short-Circuit Protection | Yes |
Power on Value | Yes, Programmable |
Safe Value | Yes, Programmable |
Ethernet | |
---|---|
Ports | 1 x RJ-45, 10/100 Base-TX |
Security | ID, Password and IP Filter |
Protocol | Modbus TCP, Modbus UDP |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Consumption | 2.6 W |
Powered from Terminal Block | 10 ~ 30 VDC |
Mechanical | |
---|---|
Dimensions (mm) | 72 mm x 123 mm x 35 mm (W x L x H) |
Installation | DIN-Rail or Wall mounting |
Environmental | |
---|---|
Operating Temperature | -25 ~ +75°C |
Storage Temperature | -30 ~ +80°C |
Humidity | 10 ~ 90% RH, Non-condensing |
Download
Ordering information
ET-7019Z/S2 CR | Ethernet I/O Module with 10-ch universal AI, 6-ch DO, DN-1822 Daughter Board and a 1.8 m Cable (RoHS) |