FR-2057HT 16-channelisolated digital output module with 20-pin screw terminal connector

FR-2057HT  16-channelisolated digital output module with 20-pin screw terminal connector

Features

The FR-2053/2053T/2053HT has 16-channel isolated photo coupler input, while the FR-2057/2057T/2057HT has 16-channel isolated photo-coupler output. The default signal connector of FR-2053 and FR-2057 is a 20-pin header. The "T" stands for screw terminal connector and the "S" stands for 3-pin shroud connector. Each 3-pin connector has one Vcc pin, one ground and one signal pin. According to different applications, the users can choose suitable modules. The FR-2000 I/O module has an FRnet interface. The users can daisy chain several FR-2000 modules together. Via FRnet, the FR-2000 modules can extend the remote I/O control of PC, PAC and PLC easily. Further information about the networking of FR-2053/2057; refer to literature related to I-7188EF, I-8172W, FRB-100/200U.

• Built-in Wire-saving FRnet DI/DO control
• High-speed transmission reliability
• Simple synchronization mechanism
• No software overhead on protocol processing
• Supporting broadcasting (1:n data transmission)
• Duplicating output easily
• Fixed I/O scan-time and I/O synchronization
• DIN-Rail mountable 

  Specifications

  Digital Output
  Output Channel	16
  Output Type	Open-Collector (NPN)
  Load Voltage	24 VDC, Max
  Load Current	100mA, Max
  Turn-on delay time	less than 1.0ms
  Turn-off delay time	less than 1.5ms
  Isolation Voltage	1500 Vrms
  Interface
  2-wire cabling	2-wire cabling Belden 9841 (2P twisted-pair cable), When different cables are used, the transmission distance may change
  Transfer distance	Max. 400m for FR-2057 Max. 100m for FR-2057T/FR-2057HT
  LED Indicators	Power, Communication Run, Communication Error, Terminal resistor, Digital output
  Transfer speed	250 kbps for FR-2057 1 Mbps for FR-2057T/FR-2057HT
  Cyclic scan time	2.88ms for FR-2057  0.72ms for FR-2057T/FR-2057HT
  Connection	20-pin header for FR-2057 series
  	Removable 20-pin Terminal Block for FR-2057T/FR-2057HT
  Power
  Input Voltage Range	+10 ~ +24 VDC (Non-isolation)
  Power consumption	2 W Max.
  Protection	Power reverse polarity protection
  Frame Ground for EMS Protection	Yes
  Connection	5-Pin Removable Terminal Block
  Mechanical
  Casing	Plastic (Flammability UL 94V-0)
  Dimensions (W x L x H)	33 mm x 102 mm x 110 mm
  Installation	DIN-Rail
  Mechanical
  Operating Temperature	-25°C ~ +75°C
  Storage Temperature	-30°C ~ +85°C
  Ambient Relative Humidity	10% ~ 90% RH, non-condensing