Module 2 cổng RS-422/485 ICP DAS I-8142-G CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

2-port RS-422/485 Module

THÔNG TIN SẢN PHẨM

I-8142-G CR đã dừng sản xuất và được thay thế bằng I-8142W-G CR

EOL Notification

Feature

• Serial Port with +/-4 kV ESD Protection
• Baud Rate of up to 115200 bps
• Internal 16-byte Hardware FIFO for each Port
• LED Indicators for TxD, RxD and Power Status

Introduction

The I-8142 provides 2 non-isolated RS-422/485 serial ports, while the I-8144 provides 4 isolated RS-422/485 serial ports. It is equipped with a 16-byte hardware FIFO for each port and oﬀers speeds up to 115.2 kbps with support for RS-422 full-duplex communication.

In the harsh industrial environment, the onboard ESD protection devices can divert this potentially damaging charge away from sensitive circuitry and protect the I-8142/I-8144 from permanent damage. The serial communication modules are designed for use with intelligent devices like bar code readers, serial printers, intelligent sensors, instrumentation equipment, computers, and almost any device with an RS-422/485 port.

Application

Factory, Building and Home Automation

Specifications

EMS Protection
ESD (IEC 61000-4-2)	± 4 kV Contact for Each Terminal

LED Indicators
Status	1 x Power and Communication 4 x COM Ports

COM Ports
Ports	2 x RS-422/485
Baud Rate	115200 bps Max.
Parity	None, Even, Odd, Mark, Space
Data Bit	5, 6, 7, 8
Stop Bit	1, 1.5, 2
FIFO Size	Internal 16 bytes for each port

Power
Consumption	1.6 W Max.

Mechanical
Dimensions (mm)	31 x 114 x 67 (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	5 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

I-8142-G CR

2-port Non-isolated RS-422/485 Module (Gray Cover) (RoHS)
Includes CA-RJ1003 Cable (10-pin RJ-45 to 10-wire Cable, 30 cm)

Module 2 cổng RS-422/485 ICP DAS I-8142-G CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng