Bộ điều khiển IR RS-232/485 Modbus RTU 10 kênh đầu ra Relay ICP DAS IR-310-RM CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

IR Controlled 10-channel High Power Relay Module

Gọi +84 904251826 để được trợ giúp

Bộ điều khiển IR RS-232/485 Modbus RTU 10 kênh đầu ra Relay ICP DAS IR-310-RM CR

Feature

  • 10 channels high power relays: 10A x 4, 5A x 6
  • Supports IR commands (custom:64, built-in:32) for relay control.
  • NO & NC terminals for each channel
  • Protection circuit for each channel
  • Sequential relay control
  • Supports maximum 5 sets of interlocked relay pairs (e.g. CW/CCW motor control)
  • Power-on values and power failure memory
  • RS-232 and RS-485 serial interface
  • Supports Modbus/RTU protocol (Slave)
  • Modbus Network IDs: 1 ~ 15 (HW); 1 ~ 247 (SW)

Introduction

IR-310-RM is a 10-channel high power relay module designed for the power control of various appliances. The relay module can switch up to 10 A loads. There are NO/NC switches and protection circuit for each channel. The relays can be controlled independently or sequentially by serial communication with Modbus RTU protocol, as well as by wireless IR remote control. There are also maximum 5 interlocked relay pairs for interlocked switching. The application field can be manual/automatic power switch, light scenario control and energy conservation etc.

Application

  • e-Classroom service
  • Lighting Scenario Control
  • Home and Building Automation

Specifications

CPU Module
NET ID Hardware: 1 ~ 15
Software: 1 ~ 247
LED Indicators
Status 1 x Power indication
10 x Relay output indicators
Infrared
IR Remote Commands 64 IR commands (#0 ~ #63) corresponding to self-defined relay states.
32 IR commands (#192 ~ #223) corresponding to built-in relay states.
IR Remote Input 1 x On-board IR receiver
1 x 3.5 mm audio jack (for CA-IR-001)
Relay Output
Channels 10
Type Form C relay SPDT
Contact Rating 5A @220VAC for RL0, RL1 & RL6~RL9
10A @220VAC for RL2 ~ RL5
(Operating temperature: 25°C)
Operate Time 10 ms for RL0,RL1 & RL6 ~ RL9,
15 ms for RL2 ~ RL5
Release Time 5 ms for RL0, RL1 & RL6 ~ RL9
10 ms for RL2 ~ RL5
Electrical Endurance 1 × 10^5 OPS
Mechanical Endurance 1 × 10^7 OPS
COM Ports
Ports RS-232 (TxD, RxD, GND)
RS-485 (DATA+, DATA-)
Baud Rate 9600, 19200, 38400, 57600, 115200 bps
Data Format Parity: None, Databits: 8, Stopbits: 1
Protocol Modbus RTU Slave
Power
Consumption 6.5W (max)
Mechanical
Dimensions (mm) 220 x 113 x 48 (W x L x H)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

IR-310-RM     CR  IR Controlled 10-channel High Power Relay Module (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: