Bộ đổi nguồn Din-Rail MCD480-24 480W, 24VDC, 20A

Chia sẻ

Thương hiệu: MCTT Loại: MCD480

Tình trạng: Còn hàng

Mã sản phẩm: MCD480-24

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Mô tả sản phẩm

Bộ đổi nguồn Din-Rail MCD480-24 480W, 24VDC, 20A

MCD480 series is one economical slim 480W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 176VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current.

In MDC480 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 85%, the product can operate at the ambient temperature between -10°C and 70°C under air convection. It is equipped with constant current mode for over-load protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV EN60950-1, and etc.) make MDC480 a very competitive power supply solution for industrial applications.

Tính năng

Universal AC input/ Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
UL508 approved
LED indicator for power on
Can be installed on Din-rail TS-35/7.5 or 15
100% full load burn-in test
Fixed switching frequency at 100KHz

Thông số kỹ thuật

Model		MCD480-24	MCD480-48
Output	DC Voltage	24V	48V
	Rated Current	20A	10A
	Current Range	0~20A	0~10A
	Rated Power	480W	480W
	Ripple & Noise	240mVp-p	480mVp-p
	Voltage Adj. Range	21~28V	43~53V
	Voltage Tolerance	±1.0%	±1.0%
	Line Regulation	±0.5%	±0.5%
	Load Regulation	±1.0%	±1.0%
	Setup, Rise Time	1200ms, 40ms/230VAC; 800ms, 40ms/115VAC at full load
	Hold Up Time	24ms/230VAC; 24ms/115VAC at full load
Input	Voltage Range	176 ~ 264 VAC 240 ~ 370VDC
	Frequency Range	47 ~ 63Hz
	Efficiency	84%	85%
	AC Current	4.8A/115VAC; 2.4A/230VAC
	Inrush Current	Cold start 27A at 115VAC, 45A at 230VAC
	Leakage Current	<3.5mA / 240VAC
Protection	Over Load	105 ~ 150%
		Protection type: Constant current limiting, recovers automatically after fault condition is removed
	Over Voltage	30~36V	54~60V
		Protection type: shut down o/p voltage, re-power on to recover
	Over Temperature	Shut down o/p voltage, recovers automatically after temperature goes down
Environment	Working Temp.	-10 ~ +70℃
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-20 ~ +85℃, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety & EMC	Safety Standards	Design refer to UL508,UL60950-1, TUV EN60950-1
	Withstand Voltage	I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃ / 70% RH
	EMC standards	Compliance to EN55011, EN55022, EN61000-3-2,-3, EN61000-4-2,3,4,5,6,8,11, ENV50204, EN55024, EN61000-6-2 (EN50082-2)
Others	Dimension	85.5125.2128.5mm (LWH)
	Weight	1.5kg
	Connection	I/P: 3 poles, O/P: 4 poles screw DIN terminal
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.