Bộ đổi nguồn Din-Rail MCTT-MDR-100-12 90W, 12VDC, 7.5A

Chia sẻ

Thương hiệu: MCTT Loại: MDR-100

Tình trạng: Còn hàng

Mã sản phẩm: MCTT-MDR-100-12

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Mô tả sản phẩm

Bộ đổi nguồn Din-Rail MCTT-MDR-100-12 90W, 12VDC, 7.5A

MCTT-MDR-100 series is one economical ultra slim 100W DIN rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 55mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 85VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current.

MCTT-MDR-100 series is designed with plastic housing that it can effectively prevent user from electric hazards. With working efficiency up to 87%, the entire series can operate at the ambient temperature between -20°C and 70°C under air convection. The complete protection functions and relevant certificates for home automations and industrial control apparatus (UL508, TUV EN60950-1, NEC class 2) make MCTT-MDR-100 a very competitive power supply solution for household and industrial applications.

Features:

Universal AC input/ Full range
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Can be installed on Din-rail TS-35/7.5 or 15
Built in DC OK relay contact
LED indicator for power on
No load power consumption <1W
100% full load burn-in test
High efficiency, long life and high reliability
1 years warranty

Specifications

OUTPUT
Model	MCTT-MDR-100-12	MCTT-MDR-100-24	MCTT-MDR-100-48
DC Voltage	12V	24V	48V
Rated Current	7.5A	4A	2A
Current Range	0~7.5A	0~4A	0~2A
Rated Power	90W	96W	96W
Ripple & Noise	120mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	12~15V	24~30V	48~56V
Voltage Tolerance	±1%	±1%	±1%
Setup, Rise Time	3000ms,50ms/230VAC; 3000ms,50ms/115VAC at full load
Hold Up Time	50ms/230VAC; 20ms/115VAC at full load
INPUT
Voltage Range	88~264VAC (47~63Hz); 120~370VDC
AC Current	1.3A/115V; 0.8A/ 230V
Efficiency	83%	86%	87%
Inrush Current	Cold start, 30A at 115VAC, 60A at 230VAC
Leakage Current	<1mA/240VAC
PROTECTION
Over Load	105%~150%
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	125%~150%
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover

Function	Type	Relay contact rating (max.): 30V/1A resistive
Environment	Working Temp.	-20 ~ +70℃ (Refer to “Derating Curve”)
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety	Safety Standards	UI508, TUV EN60950-1, NEC class 2 compliant
	Withstand Voltage	I/P-O/P:3KVAC, I/P-FG:2KVAC, 1minute
	EMC standards	EN55022 class B, EN61000-3-2,-3, ENV50204, EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 heavy industry level
Others	Dimension	5590100mm (LWH)
	Weight	0.45Kg
	Connection	I/P: 3 poles, O/P: 6 poles screw DIN terminal
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.