Bộ đổi nguồn Din-Rail MCTT-MDR-40-5 30W, 5VDC, 6A

Chia sẻ

Thương hiệu: MCTT Loại: MDR-40

Tình trạng: Còn hàng

Mã sản phẩm: MCTT-MDR-40-5

CAM KẾT CỦA CHÚNG TÔI

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Bộ đổi nguồn Din-Rail MCTT-MDR-40-5 30W, 5VDC, 6A

Features:

OUTPUT
Model	MCTT-MDR-40-5	MCTT-MDR-40-12	MCTT-MDR-40-24	MCTT-MDR-40-48
DC Voltage	5V	12V	24V	48V
Rated Current	6A	3.33A	1.7A	0.83A
Current Range	0~6A	0~3.33A	0~1.7A	0~0.83A
Rated Power	30W	40W	40.8W	39.8W
Ripple & Noise	80mVp-p	120mVp-p	150mVp-p	200mVp-p
Voltage Adj. Range	5~6V	12~15V	24~30V	48~56V
Voltage Tolerance	±2%	±1%	±1%	±1%
Setup, Rise Time	500ms,30ms/230VAC; 500ms,30ms/115VAC at full load
Hold Up Time	50ms/230VAC; 20ms/115VAC at full load
INPUT
Voltage Range	85~264VAC (47~63Hz); 120~370VDC
AC Current	1.1A/115V; 0.7A/ 230V
Efficiency	78%	85%	88%	88%
Inrush Current	Cold start, 30A at 115VAC, 60A at 230VAC
Leakage Current	<1mA/240VAC
PROTECTION
Over Load	105%~150%
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	115%~135%
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover

Function	DC OK Signal	Relay contact rating (max.): 30V/1A resistive
Environment	Working Temp.	-20 ~ +70℃ (Refer to “Derating Curve”)
	Working Humidity	20 ~ 90% RH non-condensing
	Storage Temp., Humidity	-40 ~ +85℃, 10 ~ 95% RH
	Temp. Coefficient	±0.03%/℃ (0 ~ 50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
Safety	Safety Standards	UI508, TUV EN60950-1, UL60950-1 approved, NEC class 2 compliant
	Withstand Voltage	I/P-O/P:3KVAC, I/P-FG:2KVAC, 1minute
	EMC standards	EN55022 class B, EN61000-3-2,-3, ENV50204, EN61000-4-2,3,4,5,6,8,11, EN61204-3, EN61000-6-2 heavy industry level
Others	Dimension	4090100mm (LWH)
	Weight	0.26Kg
	Connection	I/P: 3 poles, O/P: 6 poles screw DIN terminal
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.