Switch công nghiệp 4 cổng Ethernet + 1 cổng Quang (Dual Fiber, Multi Mode, ST, 2KM) ICP DAS NS-205AFT-T CR
Feature
Introduction
The NS-205AFT-T is a 4-port unmanaged Ethernet with 1 fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) transmissions. The NS-205AFT-T provides a wide 12 to 48 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.
Application
Specifications
EMS Protection | |
---|---|
ESD (IEC 61000-4-2) | ± 4 kV Contact |
LED Indicators | |
---|---|
Status | PWR1, PWR2, PWR_Fault, Link/Act, 10/100M |
Ethernet | |
---|---|
Ports | 4 x RJ-45, 10/100Base-TX |
Standards | IEEE 802.3, 802.3u, 802.3x |
Processing Type | Store & forward |
MAC Table | 2048 |
Frame Buffer Memory | 1 Mbit |
Flow Control | IEEE 802.3x flow control |
Isolation | 1500 Vrms 1 minute |
Fiber | |
---|---|
Ports | 1 x 100 Base-FX, ST connector |
Mode | Multi-Mode |
Fiber Cable | 50/125, 62.5/125 or 100/140 μm |
Distance | 2 km, (62.5/125 μm recommended) for full duplex |
Wavelength | 1300 or 1310nm |
TX Output | -20 dBm Min. -14 dBm Max. |
RX Sensitivity | -32 dBm |
RX Overload | -8 dBm |
Budget | 12 dBm |
Power | |
---|---|
Reverse Polarity Protection | Yes |
Input Range | +12 ~ +48 VDC (Redundant input) |
Redundant Power Inputs | Yes |
Consumption | 0.2 A @ 24 VDC |
Alarm Output | Yes,Relay 2 A @ 30 VDC |
Mechanical | |
---|---|
Casing | Plastic |
Dimensions (mm) | 31 x 157 x 123 (W x L x H) |
Installation | DIN-Rail Mounting |
Environment | |
---|---|
Operating Temperature | -30 °C ~ +75 °C |
Storage Temperature | -40 °C ~ +85 °C |
Humidity | 10% ~ 90% RH, non-condensing |
Download
Ordering Information
NS-205AFT-T CR | Multi-mode, ST Connector, 4-port 10/100 Mbps with 1 fiber port Switch with Power Input +12 VDC ~ +48 VDC (RoHS) |