Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Multi Mode, SC, 2KM) ICP DAS NSM-206FC CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

4-port 10/100 Mbps Ethernet with 2 fiber port Switch (Multi mode, SC connector) with metal case

Gọi +84 904251826 để được trợ giúp

Switch công nghiệp 4 cổng Ethernet + 2 cổng Quang (Dual Fiber, Multi Mode, SC, 2KM) ICP DAS NSM-206FC CR

Feature

• Provides 2 x 100-FX fiber port plus 4 x Ethernet ports
• Each port supports both 10/100 Mbps speed auto negotiation
• Full duplex IEEE 802.3x and half duplex backpressure flow control
• Automatic MDI/MDI-X crossover for plug-and-play
• Store-and-forward architecture
• Supports operating temperatures from 0 ~ +70 °C
• Multi-mode, SC Connector Fiber supports

Introduction

The NSM-206FC is a 4-port unmanaged Ethernet with dual fiber port switch. Using fiber optics, you can prevent noise from interfering with your system and supports high-speed (100 Mbps) and high-distance (up to 2 km) ransmissions. The NSM-206FC provides a wide 10 to 30 VDC power range to fit all the common power standards found in industrial automation, without external power converters. The wide power input lowers installation and maintenance costs.

Application

Specifications

EMS Protection
ESD (IEC 61000-4-2) ± 4 kV Contact
LED Indicators
Status PWR1, PWR2, PWR_Fault, PWR_OK, Link/Act, 10/100M
Ethernet
Ports 4 x RJ-45, 10/100Base-TX
Standards IEEE 802.3, 802.3u, 802.3x
Processing Type Store & forward; wire speed switching
MAC Table 1024
Memory Bandwidth 1.6 Gbps
Frame Buffer Memory 256 Kbit
Flow Control IEEE 802.3x flow control, back pressure flow control
Isolation 1500 Vrms 1 minute
Fiber
Ports 2 x 100 Base-FX, SC connector
Mode Multi-Mode
Fiber Cable 50/125, 62.5/125 or 100/140 gm
Distance 2 km, (62.5/125 gm recommended) for full duplex
Wavelength 1300 or 1310nm
TX Output -20 dBm Min.
-14 dBm Max.
RX Sensitivity -34 dBm
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC (Redundant input)
Redundant Power Inputs Yes
Consumption 0.2 A @ 24 VDC
Alarm Output Yes, Relay 1 A @ 30 VDC
Mechanical
Casing Metal
Dimensions (mm) 73 x 132 x 105 (W x L x H)
Installation DIN-rail mounting or wall mounting
Ingress Protection Rating IP20
Environment
Operating Temperature 0 °C ~ +70 °C
Storage Temperature -20 °C ~ +85 °C
Humidity 10% ~ 90% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

NSM-206FC     CR  Multi-mode, SC Connector, 4-port 10/100 Mbps with dual fiber port Switch; metal case (RoHS)
Includes 4SNPNA010021G Wall mount

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: