Module 2 cổng Ethernet + 2 khe cắm module mở rộng ICP DAS PDS-821 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Programmable Serial-to-Ethernet Device Server with 2-port Ethernet Switch and 2x Expansion Slots

THÔNG TIN SẢN PHẨM

Feature

•Incorporate Serial Devices in an Ethernet network
•"Virtual COM" extends PC COM ports
•Includes a VxComm Driver for 32- and 64-bit Windows 7 SP1/10/2012/2016
•Programmable Internet/Ethernet Controller
•Watchdog Timer suitable for use in harsh environments
•Built-in High performance MiniOS7 from ICP DAS

Introduction

The PDS-811 and PDS-821 programmable device servers (PDS) are compact, modular, intelligent, rugged, and are designed for networking RS-232 and RS-422/485 serial devices to an Ethernet network. The PDS-811 has one I/O expansion slot, while PDS-821 has two I/O expansion slots that can be used to attach various 2- or 4-port serial communication modules. Therefore, a maximum of 4 serial ports can be installed on the PDS-811 or a maximum of 8 serial ports can be installed on the PDS-821.

Note: There is no serial module built-in to the PDS-811 or PDS-821 by default.

The PDS-811 and PDS-821 controllers are equipped with a 2-port 10/100 Base-TX Ethernet Switch that can be used to connect two network segments. The Ethernet Switch processes and routes data on the data-link layer (layer 2) of the OSI model to create a different collision domain per switch port. Using a switch allows you to attain dedicated bandwidth on point-to-point connections with every computer, and therefore run in full duplex mode with no collisions. Furthermore, the built-in 2-port Ethernet Switch on the PDS-811/821 enables network wiring to be simplified by cascading your Ethernet devices.

The PDS-8x1 series contains a built-in operating system, the MiniOS7, which offers a stable and high performance environment that is similar to DOS. The MiniOS7 can boot up the PDS-8x1 series within just one second, with the added benefit of no virus problems and a small footprint. Furthermore, the PDS-8x1 series is designed for low power consumption, maintenance elimination (no hard disk and no fan), and is constructed from fire retardant materials (UL94-V0 level) with a robust case.

Application

• Factory Automation
• Building Automation
• Home Automation

Specifications

CPU Module
CPU	80186-80 MHz or compatible
EEPROM	16 KB
Flash	512 KB
SRAM	512 KB
Watchdog Timer	Yes

LED Indicators
Status	1 x Power 2 x Communication

COM Ports
Ports	1 x 3-wire RS-232
Baud Rate	115200 bps Max.
Parity	None, Even, Odd
Data Bit	7, 8
Stop Bit	1

Ethernet
Ports	2-port 10/100 Base-TX Ethernet Switch (Auto-negotiating, auto MDI/MDI-X, LED indicator)

Power
Consumption	0.6 A @ 5 V for CPU and Backplane, 1.0 A @ 5 V for Plug-in Modules, Total: 8 W

Mechanical
Dimensions (mm)	95 mm x 132 mm x 110 mm
Installation	DIN-Rail or Wall mounting

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +80 °C
Humidity	5 ~ 95% RH, non-condensing

Download

Datasheet

Documents

Ordering Information

PDS-821 CR

Programmable Serial-to-Ethernet Device Server with 2-port Ethernet Switch and 2x Expansion Slots (RoHS)
Includes CA-0910 Cable

Module 2 cổng Ethernet + 2 khe cắm module mở rộng ICP DAS PDS-821 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng