Card PCI 1 cổng CAN ICP DAS PISO-CAN100U-T CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

1-Port CAN Universal PCI Card

THÔNG TIN SẢN PHẨM

Features

One CAN bus communication port
Compatible with CAN specification 2.0 parts A and B
On-board optical isolation protection
Programmable transfer rate up to 1 Mbps
2500 Vrms photo couple isolation on the CAN bus
Jumper select 120Ω terminal resistor for each port
Direct memory mapping to the CAN controllers
33MHz 32bit 5V PCI bus (V2.1) plug and play
Universal PCI card, supports both 5V and 3.3V PCI bus
We have verified to drive 100 CAN nodes at the same time

Note: We have verified to drive 100 CAN nodes at the same time via one CAN port of PISO-CAN100U.

Introduction

The CAN (Controller Area Network) is a serial communication protocol, and efficiently supports distributed real-time control with a very high level of security. It is an especially suit for networking "intelligent" devices as well as sensors and actuators within a system or sub-system. In CAN networks, there is no addressing of subscribers or stations in the conventional sense, but instead prioritized messages are transmitted. As standalone CAN controller, PISO-CAN100U-T can represent an economic solution of an active CAN board. It has one CAN bus communication port with 5-pin screw terminal connector, and has the ability to cover a wide range of CAN applications. Besides, PISO-CAN100U-T uses the new CAN controller Phillips SJA1000T and transceiver 82C250, which provide bus arbitration, error detection with auto correction and re-transmission function. It can be installed in a 5V PCI slot and supported truly “Plug & play”

Applications

• CAN bus communication application
• DeviceNet, CANopen, CAN J1939, SDS(System Wide Network) protocol application
• Control System
• Building Automation
• Factory Automation
• Distributed data acquisition

Specifications

Software
Driver	Windows XP/7/8/10 (32-bit/64-bit OS), Linux 2.6.x ~ 4.8.0, LabView, DASYLab, InduSoft
Library	VB 6.0, VC++ 6.0, BCB 6.0, Delphi 4.0, C#.Net, VB.Net

PC Bus
Type	Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, plug and play

CAN
Controller	NXP SJA1000T with 16 MHz clock
Transceiver	NXP 82C250
Ports	1
Baud Rate	10 k ~ 1 M bps
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor	Jumper for 120 Ω terminal resistor

Power
Consumption	225 mA @ 5 V

Mechanical
Dimensions (mm)	126 x 85 x 22 (W x L x D)

Environmental
Operating Temperature	0 ~ +60 °C
Storage Temperature	-20 ~ +70 °C
Humidity	5 ~ 85% RH, Non-condensing

Download

Data sheet

Documents

Ordering Information

PISO-CAN100U-T CR

1-port Isolated Protection CAN Universal PCI Card with 5-pin Screw Terminal Connector (RoHS)

Card PCI 1 cổng CAN ICP DAS PISO-CAN100U-T CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng