Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đCard PCI High-speed 4-axis Motion Control Card with FRnet Master ICP DAS PISO-PS410 CR
Features
Introduction
The PISO-PS410 is a 4-axis stepping/pulse-type servo motor control card that can be used on any IPC with a 5 V or 3.3 V PCI bus, and is suitable for general-purpose motion control applications. This card equipped with one FRnet Master which allows the fast remote I/O of the IPC to be expanded easily. The two-wired FRnet interface allows a maximum 128 DI and 128 DO channels, which are automatically scanned within a period of 0.72 ms. In addition to its wide speed range, this intelligent motion controller also has a variety of motion control functions built in, such as 2/3-axis linear interpolation, 2-axis circular interpolation, T/S-curve acceleration/ deceleration, numerous synchronous actions, automatic homing, and others.
A major advantage is that the majority of the PISO-PS410 motion control functions are performed by the high-performance motion ASIC with little load on the processor. The motion status, FRnet I/O, and the other I/O cards on the IPC can still be monitored while driving the motors. As the low CPU loading requirements of the PISO-PS410 is minimal, one or more motion cards can be used with a single IPC. ICP DAS also provides a variety of functions and examples that can be used to reduce the need for additional programming, making it a highly cost-effective solution for motion control application developers.
Applications
Click to view the Introduction of https://mctt.vn/motion-control-icp-das
Specifications
| Software | |
|---|---|
| OS Support | Windows 7 32/64-bit Windows XP/2000 32-bit |
| Utility | EzGo Utility |
| Hardware | |
|---|---|
| Connector | 100-pin SCSI-II |
| General | |
|---|---|
| No. of Axes | 4 |
| Operation Mode | Semi-closed Loop |
| Synchronous Action | 10 activation factors and 14 actions |
| Speed Profile | T/S-curve |
| Position Control Mode | Incremental mode and Absolute mode |
| Command Type | Pulse Command |
| Axis I/O | |
|---|---|
| Servo Interface Output | SVON, ALM_RST, ERC |
| Mechanical Switch Input | Home, LMT+/-, NHOME, EMG |
| Position Compare Output | High-Speed 5 V TTL or 24 V open collector (2 of any 4 axes) |
| Servo Interface Input | INP, ALM |
| Encoder Input | |
|---|---|
| Ring Counter Mode | 32-bit |
| Mode | A/B Phase, Up/Down |
| Counting Rate | 4 MHz |
| Counter Width | 32-bit |
| Pulse Output | |
|---|---|
| Mode | CW/CCW, PULSE/DIR |
| Counter Width | 32-bit |
| Rate | 4 MHz (Max.) |
| Interpolation | |
|---|---|
| Circular | Any 2 axes |
| Linear | Any 2 to 3 of 4 axes |
| Digital Input | |
|---|---|
| Channels | Local: 4 DI Expandable: 128 DI |
| Isolation | 2500 Vrms optical isolation |
| Digital Output | |
|---|---|
| Channels | Local: 4 DO Expandable: 128 DO |
| Isolation | 2500 Vrms optical isolation |
| PC Bus | |
|---|---|
| Type | Universal PCI Bus |
| Power | |
|---|---|
| Consumption | +5 V @ 500 mA |
| Environment | |
|---|---|
| Operating Temperature | -20 ~ +75°C |
| Storage Temperature | -30 ~ +85°C |
| Humidity | 5 ~ 85% RH, non-condensing |
Download
Ordering Information
| PISO-PS410 | Universal PCI Bus, High-speed 4-axis Motion Control Card with FRnet Master |
