Bộ chuyển đổi và khuếch đại tín hiệu tương tự 1 kênh sang 3 kênh ICP DAS SG-3383 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng
Liên hệ

3-channel DC Current Signal Splitter

Gọi +84 904251826 để được trợ giúp

Bộ chuyển đổi và khuếch đại tín hiệu tương tự 1 kênh sang 3 kênh ICP DAS SG-3383 CR

Feature

• One 4 to 20 mA Input to Three 4 to 20 mA Outputs
• Zero and Span Adjustments for Each Output
• Full 3000 V Isolation for Input/Output/Power
• Built-In Loop Power Supplies for Sink/Source I/O
• Split, Convert, Boost, and Rescale Process Signals
• Split Process Signals for Control and Validation
• Interface a Process Signal with Multiple Panel Meters, PLCs, Recorders, Data Acquisition, DCS, and SCADA Systems
• 8 kV ESD Protection
• 4 kV EFT Protection for Power Line
• Flexible DIN-Rail Mounting

Introduction

The SG-3383 DC current signal splitters accept one 4 to 20 mA current input and provide three optically isolated 4 to 20 mA current outputs that are linearly related to the 4 to 20 mA current input. This provides an economical solution when one signal must be sent to three different devices. Typical applications include isolation, output splitting, output device separation and redundancy (i.e. to prevent failure of the entire loop if one device fails), or a combination of these. The input signal is filtered, amplified, split, and then passed through an opto-coupler to the output stages. Full 3-way isolation (input, output, power) , 4 kV EFT Protection for Power Line and 8 kV ESD Protection make this module useful for ground loop elimination, common mode signal rejection,and noise pickup reduction. The SG-3383 includes an LED display that can be used to indicate whether the module is functioning correctly, and also includes VRs (Zero, Span) that can be used to calibrate the output range accuracy. The input bandwidth of the SG-3383 is typically 2.5 kHz.

Application

• Building Automation
• Factory Automation
• Machine Automation
• Remote Maintenance
• Remote Diagnosis
• Testing Equipment

Specifications

Isolation
Three-way Isolation 3000 VDC
EMS Protection
EFT (IEC 61000-4-4) ±4 kV for Power Line
ESD (IEC 61000-4-2) ±8 kV Contact for each Terminal
LED Indicators
Status Yes, 1 as Power/Communication Indicator
Analog Input
Channels 1
Range +4 ~ +20 mA
Bandwidth 2.5 kHz
Input Impedance 125 Ω
Analog Output
Channels 3
Range +4 ~ +20 mA
Accuracy ±0.1% of FSR (typical)
Current Output Wiring Source
Current Output Capacity 500 Ω
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 2.5 W
Mechanical
Dimensions (mm) 33 mm x 127 mm x 99 mm (W x L x H)
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85°C
Humidity 10 ~ 95% RH, Non-condensing

Download

Datasheet

Documents

Ordering Information

SG-3383     CR  3-channel DC Current Signal Splitter (RoHS)

Sản phẩm đã được thêm vào giỏ hàng

Số lượng:

Tổng tiền:

Sản phẩm đã được thêm vào giỏ hàng

Phí vận chuyển: Tính khi thanh toán

Tổng tiền thanh toán: