-
-
-
Tổng tiền thanh toán:
-
Sản phẩm đã được thêm vào giỏ hàng
Số lượng:
Tổng tiền:
12/20-Port Layer 3 EN50155 Industrial Ethernet Switch
Switch công nghiệp Layer 3 EN50155 quản lý 16 cổng Gigabit PoE M12 + 4 cổng Gigabit Bypass M12 3onedata TNS5800-16P4GT-2P24
TNS5800 series belongs to layer 3 EN50155 industrial Ethernet switches. The product conforms to the requirements of industrial standard EN50155 and EN50121 Ethernet interfaces use firm and reliable M12 connectors which can adapt to usage scenario with vibration and shock. PoE power supply conforms to IEEE802.3af/at protocol standard, and it can power device over Ethernet, thus decreasing the cable connection of powered devices. This series has 5 products. They provide 110VDC power or 24VDC input and adopt rack-mounted installation, which can meet the needs of different application sites.
The network management system supports various network protocols and industry standards, such as static routing, RIP, OSPF, VRRP, STP/RSTP/MSTP, ERPS, 802.1Q VLAN, QoS function, DHCP Server, IGMP Snooping, LLDP, port trunking, port mirroring, etc. It also possesses complete management functions, support port configuration, port statistics, port IP binding, access control, 802.1X authentication, network diagnosis, rapid configuration, online upgrade, etc.; CLI, WEB, Telnet, SNMP, SSH and other access methods can be supported. Network management system could bring you great user experience through its friendly interface design and easy and convenient operation.
When power supply or port has link failure, ALARM indicator will be bright and send out alarm, meanwhile, alarm device connected to the relay will send out alarm for rapid scene troubleshooting. The input power supply is two independent power supply circuits which can ensure the normal operation of the device when one power supply fails. The hardware adopts fanless, low power consumption and wide temperature design, and the external heat sink provides extraordinary heat dissipation performance. This devices have passed rigorous industrial standard tests, which can suit for the industrial scene environment with harsh requirements for EMC. It can be widely used in systems such as train network, signal, on-board PIS, CCTV.
Tính năng
Thông số kỹ thuật
Standard & Protocol |
IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX IEEE 802.3ab for 1000Base-T IEEE 802.3x for Flow Control IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid Spanning Tree Protocol IEEE 802.1s for Multiple Spanning Tree Protocol IEEE 802.1Q for VLAN IEEE 802.1p for CoS IEEE 802.1X for 802.1X Authentication IEEE 802.1AB for LLDP IEEE 802.3af for PoE IEEE 802.3at for PoE+ ITU-T G.8032 for ERPS |
Management |
SNMP v1/v2c/v3 Centralized Management of Equipment, RMON, Port Mirroring, QoS, LLDP, DHCP Server, File Management, Port Statistics, Log Information, Static ARP, PoE Management |
Security |
Classification of User Permissions, ACL, NAT, 802.1X Authentication, Radius Server Authentication, Port Alarm, Power Alarm, Storm Suppression, SSHD Configuration, Telnet Configuration, Loop Detection, Aggregation Protection, Link Flapping Protection, DHCP Snooping |
Switch Function |
802.1Q VLAN, Port Trunking, Bandwidth Management, Flow Control, Port Isolation |
Unicast / Multicast |
Static Multicast, IGMP-Snooping, PIM-SM, PIM-SM |
Redundancy Technology |
Ring, STP/RSTP/MSTP, ERPS |
Troubleshooting |
Ping, Traceroute, Port Loopback |
Routing Technique |
VRRP, RIP, OSPF |
Time Management |
NTP |
Interface |
Gigabit PoE M12:10/100/1000base-T (X), M12 (Female), 8-Pin X-Coded, automatic flow rate control, full/half duplex mode, MDI/MDI-X automatic detection; The maximum capacity of a single port is 30W PoE power supply output. Pin 1 and 2 of PoE power supply are positive, while pin 3 and 4 are negative Gigabit M12: 10/100/1000Base-T(X), M12(Female), 8-Pin X-Coded, Automatic Flow Control, Full/half Duplex Mode, MDI/MDI-X Autotunning;it supports two groups of Bypass 100M PoE M12:10/100base-T(X), M12 (Female), 4-Pin D-Coded, automatic flow control, full/half duplex mode, MDI/MDI-X automatic detection; The single port supports up to 30W PoE power supply output. Pin 1 and 3 of PoE power supply are positive, while pin 2 and 4 are negative Alarm interface: 8-pin 5.08mm pitch terminal blocks (includes 2-pin relay) or 7-pin Male M23 interface (includes 2-pin relay), support 1 relay alarm output, the current load capability is 1A@30VDC or 0.3A@125VAC. Console port: CLI command line management port(RS-232), RJ45 |
Indicator |
Power indicator, alarm indicator, running indicator, interface indicator, PoE indicator |
Switch Property |
Transmission mode: store and forward MAC address: 16K Packet buffer size: 12Mbit Backplane bandwidth: 128G Switch time delay: <10μs |
Power Supply |
TNS5800-8P4GT-2P110, TNS5800-8GP4GT-2P110: Power supply range: 110VDC (66~156VDC), dual power supply redundancy Connection method: 8-pin 5.08mm pitch terminal blocks (includes 6-pin power supply) Connection protection: anti-reverse connection TNS5800-16P4GT-2P110, TNS5800-16GP4GT-2P110: Power supply range: 110VDC, dual power supply redundancy Connection method: 7-pin Male M23 (includes 4-pin power supply) Connection protection: anti-reverse connection |
Power Consumption |
Full load (no PoE load): < 20W Full load (including PoE load): <120W |
Working Environment |
Operating temperature: -40~75℃ Storage temperature:-40~85℃ Relative humidity: 5%~95% (no condensation) |
Physical Characteristic |
Housing: IP40 protection, metal Installation: 1U rack mounting Dimension (W x H x D): 482.6mm×44.45mm×200mm (lugs are included for 12-Port device) 441.6mm × 44.45mm × 290mm (no lugs for 20-Port device) |
Industrial Standard |
EN 50121-3-2: 2016 standard, Table 5.3 (Electrostatic Discharge), Class A Air discharge:± 8kV Contact discharge: ±6kV EN 50121-3-2: 2016 standard, Table 3.3 (Surge), Class A Power supply: common mode±2kV, differential mode±1kV EN 50121-3-2: 2016 standard, Table 3.2 (Electrical Fast Transient Pulses), Class A Power supply: ±2kV Signal: ±2kV EN 50121-3-2: 2016 standard, Table 5.1, 5.2 (Radio Frequency Electromagnetic), Class A 80MHz~800MHz, 20V/m 800MHz~1GHz, 20V/m 1.4GHz~2.0GHz, 10V/m 2.0GHz~2.7GHz, 5V/m 5.1GHz~6GHz, 3V/m EN 50121-3-2: 2016 standard, Table 3.1, 4.1 (Conducted Disturbance Induced by RF Fields), Class A Power supply: 0.15MHz~80MHz, 10V Signal: 0.15MHz~80MHz, 10V EN 50121-3-2: 2016 standard, table 3.1 (Power Supply Conducted Disturbance) 150kHz~500kHz, 79dBμV quasi-peak value 500kHz~30MHz, 73dBμV quasi-peak value EN 50121-3-2: 2016 standard, table 3.1 (Radiation Disturbance) 30MHz~230MHz, <40dBμV/m quasi-peak value 230MHz~1GHz, <47dBμV/m quasi-peak value Shock: IEC 61373 Free fall: IEC 60068-2-32 Vibration: IEC 61373 |
Authentication |
CE, FCC, RoHS, EN50155, EN50121-3-2, IEC61373 |
Warranty |
3 years |
Download
Thông tin đặt hàng
Available Models |
100M PoE M12 |
Gigabit PoE M12 |
Gigabit Bypass M12 |
Power Supply |
TNS5800-8P4GT-2P110 |
8 |
– |
4 |
110VDC redundant power supply |
TNS5800-8GP4GT-2P110 |
– |
8 |
4 |
|
TNS5800-16P4GT-2P110 |
16 |
– |
4 |
|
TNS5800-16GP4GT-2P110 |
– |
16 |
4 |
|
TNS5800-16P4GT-2P24 |
– |
16 |
4 |
18~36VDC redundant power supply |
Số lượng:
Tổng tiền: