Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đBộ điều khiển nhúng IoT (IIoT Edge Controller) ICP DAS WISE-7901D CR
Features
• Runs on browsers, no extra software tool is required.
• No more programming, Web pages provided for control logic editing.
• IF-THEN-ELSE logic rules execution ability.
• Support DI/DO X-Boards: X107, X109, X110, X111.
• Support Multi-Function X-Boards: X202, X203, X303, X304, X305, X308, X310, X324.
• Support I/O channel monitoring/control, Timer, Schedule operations.
• Support non-SSL Email sending and CGI Command sending operations.
• Modbus TCP Protocol for SCADA System Integration.
• IEEE 802.3af-compliant Power over Ethernet (PoE).
Introduction
WISE (Web Inside, Smart Engine) is a product series developed by ICP DAS that functions as control units for use in remote logic control and monitoring in various industrial applications. WISE offers a user-friendly and intuitive web site interface that allows users to implement IF-THEN-ELSE control logic on controllers just a few clicks away; no programming is required. With its powerful and easy-to-use features, it will minimize the learning curve, shorten time to market and dramatically reduce the effort and cost spent on system development. WISE-7901D follows IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) specification. It allows receiving power from PoE enabled network by Ethernet pairs (Category 5 Ethernet cable). This feature provides greater flexibility and higher efficiency therefore simplifying systems design, saving space, reducing cables and eliminating the requirement for dedicated electrical outlets. Meanwhile, in case under a non-PoE environment, WISE-7901D will still be able to receive power from auxiliary power sources like AC adapters or battery, etc. This module WISE-7901D supports Modbus/TCP protocol to make seamless integration with SCADA software available. It supports an I/O expansion bus to implement various I/O functions such as D/I, D/O, A/D, D/A according to the using X-Board.
Specifications
| Software | |
|---|---|
| Protocol | •Modbus TCP •CGI Command (Sending) |
| Function | •Web Interface for Configuration •IF-THEN-ELSE Logic operation (36 rules supported) •I/O channel monitoring and control •Timer operation (12 set supported) •Schedule operation (12 set supported) •Internal Register operation (48 set supported) •Recipe operation (12 set supported) •Advanced P2P (8 set supported) •non-SSL Email sending function •SNTP Time Synchronization |
| CPU Module | |
|---|---|
| CPU | 16-bit CPU (80 MHz) |
| LED Indicators | |
|---|---|
| Status | 1 x PoE Power/System status 1 x 5-digit 7-segment LED display |
| I/O Expansion | |
|---|---|
| I/O Type | X-board |
| COM Ports | |
|---|---|
| Ports | COM 1: Reserved COM 2: Reserved |
| Ethernet | |
|---|---|
| Ports | RJ-45 x 1, 10/100 Base-TX (Auto-negotiating, Auto MDI/MDI-X, LED indicators) |
| PoE | Yes |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Consumption | 2.5 W |
| Powered from PoE | Yes, IEEE 802.3af, Class 1 |
| Powered from Terminal Block | Yes, 10 ~ 48 VDC |
| Mechanical | |
|---|---|
| Dimensions (mm) | 72 x 123 x 35 (W x L x H) |
| Installation | DIN-Rail Mounting/Wall Mounting |
| Environmental | |
|---|---|
| Operating Temperature | -25 ~ +75 °C |
| Storage Temperature | -40 ~ +80 °C |
| Humidity | 5 ~ 90% RH, Non-condensing |
Download
Ordering infromation
| WISE-7901D CR | Intelligent User-defined I/O Module with LED Display (RoHS) |
