Bộ lập trình PLC Cimon CM3-SP16PDRF

Chia sẻ

Thương hiệu: CIMON Loại: Bộ lập trình PLC

Tình trạng: Còn hàng

Mã sản phẩm: CM3-SP16PDRF

CAM KẾT CỦA CHÚNG TÔI

Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7

Để được hỗ trợ. Hãy gọi: 0904251826

Khuyến mãi đặc biệt !!!

Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đ

FREESHIP Miễn phí vận chuyển

HSD: Không thời hạn

Sao chép

Mô tả sản phẩm

Bộ lập trình PLC Cimon CM3-SP16PDRF

8 kênh đầu vào số (DI) + 8 kênh đầu ra Relay, truyền thông 1 cổng RS-232, 1 cổng RS-485, 2 cổng Gigabit Ethernet, USB C Loader, SD/MMC Card Slot

The PLC-S Plus CPU offers ultra-fast processing, extended operating temperature (-20 to +70°C), and secure DIN rail mounting for easy installation. With support for up to 15 expansion modules and 512 I/O points, it’s built for scalable, high-performance automation and reliability.

Tính năng

Class 1, Division 2 Rating*
Extended operating temperature: -20 to +70 °C
Under 20ns processing speed
Easy + secure DIN rail mounting
Add up to 15 PLC expansion modules
Up to 512 I/O
Dual ethernet ports
24V DC power
Easy access run/stop control
Micro SD card reader
USB-C loading port
RS232/RS422/485 serial ports
Push terminal type
SP32PDCF: 16 DI (SINK&SOURCE) & 16 DO (SOURCE)
SP32PDTF: 16 DI (SINK&SOURCE) & 16 DO (SINK)
SP16PDRF: 8 DI (SINK&SOURCE) & 8 DO (RELAY)
Supported Protocols:
- EtherNet/IP Server
- EtherCAT*
- Modbus TCP/RTU Master/Slave
- Profinet (Slave)*
- MQTT

Thông số kỹ thuật

Part Number		CM3-SP32PDTF	CM3-SP32PDCF	CM3-SP16PDRF
Power supply		12-24 VDC, 0.58 A, Tolerance : -5%, +10%
Power Consumption		4.8W (MAX: 23.9W)	4.8W (MAX: 23.8W)	5.7W (MAX: 26.5W)
Program Control Method		Cyclic Execution, Time Driven Interrupt, Stored Program
Total Data Memory (words)		243,989 (Device 64,789, Global Var 179,200)
User Data Memory		512KB (PLC Program : 128KStep) *ST program not included
Inrush Current		30A Peak
Permissible Instantaneous Power Failure Time:		50 ms
Dielectric Strength	Between power and FE terminals	1,500V AC, 1 minute
	Between output and FE terminals	3,000V AC, 1 minute
	Between power and input terminals	3,000V AC, 1 minute
	Between power and output terminals	3,000V AC, 1 minute
	Between input and output terminals	500V AC, 1 minute		3,000V AC, 1 minute
Insulation Resistance	Between power and FE terminals	100MΩ or higher (1,000V DC megger)
	Between output and FE terminals	100MΩ or higher (1,000V DC megger)
	Between power and input terminals	100MΩ or higher (1,000V DC megger)
	Between power and output terminals	100MΩ or higher (1,000V DC megger)
	Between input and output terminals	100MΩ or higher (1,000V DC megger)
I/O Control Method		I/O Refresh, Directed by program instruction
Program Language		IL (Instruction List), LD (Ladder Diagram), SFC (Sequential Function Chart), FBD (Function Block Diagram), FBD Extension, ST (Structured Text)
Data Processing Method		32-bit (4 Bytes)
Intructions	Sequence	60
	Application	480
Processing Speed	LD	16 ns/Step
	MOV	33ns/Step
	Floating-point Arithmetic	+, -, x, / : 41 ns/Step
Floating-Point Arithmetic		Supporting instructions for ﬂoating-point arithmetic
Number of Program Blocks		Maximum 128 blocks
Max Expansion Blocks		CPU + Max 15 expansion blocks
Operation Mode		Remote Run, Remote Stop
Periodic Interruption		Maximum 15, cycle setting (1–60,000 ms, Unit: 1 ms), priority setting (0–14)
Data Preservation Against Power Failure:		K device and retention (Latch) in M, L, T, C, S, D device Devices that use “Retain” option in Global Variable
Watch Dog Timer (WDT)		10–10000 ms (Unit: 10 ms)
Restarting		Cold, Hot Restart
Timer		Cycle: 0.01 s-6,553.5 s (Either 10 or 100 ms) On Delay, Addition, Monostable, Retriggerable
Counter		Counter range: -32,768–32,767 Up Counter, Down Counter, Up-Down Counter, Ring Counter
PID		32 Channels, Auto-Tuning
Self-diagnosis		Processing delays, memory issues, I/O / Battery / Power error, WDT
Restarting		COLD, HOT Restart
Timer		Cycle: 0.01-6553.5 s (Either 10 or 100 ms) On Delay, Addition, Monostable, Retriggerable TC (Current Value), TS (Setting Value)
Counter		Counter range: -32,768 – 32,767 Up Counter, Down Counter, Up-Down Counter, Ring Counter CC (Current Value), CS (Setting Value)
PID		32 Channels, auto-tuning
Communication Channels	USB	USB 2.0 (C type): For Loader Protocol
	Serial	RS-232C (Max 115,200 bps), RS-485 (Max 115,200 bps) 1 port each CICON Loader, CIMON-HMI, Modbus RTU Master/Slave
	Ethernet	10/100/1000 Base-T/TX 2 ports CICON Loader, CIMON-HMI, MODBUS TCP Master/Slave
Event Log		Max 100 logs (Power, Mode, Error)
Etc.		I/O Reservation, RTC, Online Edit Option: SD/MMC Slot
Capacity of Scan Program		128k steps
RAM Backup		Backup Data: Program, Parameter, Latch data, Global var, clock data
RTC	Battery	Lithium primary battery (CR2032)
	Battery Life	Approx. 8 years
	Replacability	Possible
Memory Card	Spec.	SD Memory Card: FAT32, 32 GB
	Function	Firmware up/down grade, Program download, Device Memory Backup
Memory Type	X	8192
	Y	8192
	M	65536
	L	65536
	K	65536
	F	2048
	T	4096
	C	4096
	S	100*100 steps
	D	32767 Words (524,272)
	Z	1024 words
	Q	512 words
	R	16 words (index)
Input filter		3 to 200ms (selectable in increments of 1ms)
Subroutines		Yes
For/Next Loops		Yes
Math (Interger and Hex)		Yes
Self-Diagnosis		Monitoring process delay, WDT (Detects delay of scan time), Memory error, I/O error, Low Battery Power ON/OFF Status
Password Security		Yes