Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đModule 4 kênh đầu vào Load Cell ICP DAS e-LCell4 CR
Feature
Introduction
The e-LCell4 is an e-Bus x 1 (similar to PCI-E x1) module that provides 4-channel Load Cell Input. This module needs to be installed on an e-Bus x1 slot of the AXP-9000-IoT Programmable Automation Controller (PAC).
The e-LCell4 equips the high-accuracy ADC, so it provides 4 strain gauge input channels for measuring the minor changes of the Load Cell signal. The module can be used to measure Load cell transducer Input signals for floating signal source in differential mode (4-Wire/6-Wire Load Cell)
The module installed on AXP-9000 with 64-bit Windows 10 IoT OS supports DLL SDK and Active X control together with various language sample programs based on Visual C++, Visual Basic, C#.NET, Visual Basic.NET and LabVIEW are provided in order to help users quickly and easily develop their own applications.
Application
• Signal Analysis
• FFT and Frequency Analysis
• Transient Analysis
• Vibration Analysis
• Other Industrial and Laboratory Measurement and Control
Specifications
| Software | |
|---|---|
| SDK | LabVIEW Demo VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB Demo |
| Bus Interface | |
|---|---|
| Type | e-Busx1 |
| Hardware | |
|---|---|
| Connector | 32-pin Terminal Block |
| LED Indicators | |
|---|---|
| Status | 1 x Power |
| Strain Gauge, Load Cell Input | |
|---|---|
| Channels | 4 (Load Cell Transducer) |
| Range | ±227 mV (Load Cell Transducer) |
| Wiring | Full-Bridge, Half-Bridge, Quarter-Bridge |
| Accuracy | 0.05 % of FSR ±1 LSB @ 25 °C, ±10 V |
| Resolution | 24-bit |
| Sampling Rate | 15 kS/s |
| Impedance | 10,000 MΩ/4 pF |
| Overvoltage Protection | Continuous ±35 Vp-p |
| Excitation Voltage Output | |
|---|---|
| Channels | 4 |
| Range | 10 V |
| Accuracy | ±0.05 % of FSR |
| Max. Load Current | 60 mA |
| Drift | ±50 ppm/°C |
| Power | |
|---|---|
| Consumption | 1 A @ +5 V |
| Mechanical | |
|---|---|
| Dimensions (mm) | 31 x 134 x 145 (W x L x H) |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +60 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 90 % RH, non-condensing |
Download
Ordering Information
| e-LCell4 CR | High speed LoadCell (24-bit, 15KHz) Input Module, 4-channel, Terminal Block (RoHS) |
