Cam kết 100% chính hãng
Hoàn tiền 111% nếu hàng giả
Giao hàng nhanh chóng & an toàn
Hàng hóa đầy đủ CO, CQ
Hỗ trợ 24/7
Khuyến mãi đặc biệt !!!
Áp dụng Phiếu quà tặng/ Mã giảm giá theo ngành hàng.
Miễn phí vận chuyển với đơn hàng từ 10.000.000đModule 4 cổng Gigabit PoE Ethernet ICP DAS e-PoE404 CR
Feature
Introduction
e-PoE404 is an e-Bus x 4 (similar to PCI-E x4) Ethernet communication module that supports 4 independent 10/100/1000BaseT(X) and 802.3af/802.3at PoE compatible Ethernet ports. This module needs to be installed on an e-Bus x4 slot of the AXP-9000-IoT Programmable Automation Controller (PAC).
The module supports 4-channel independent Gigabit Ethernet ports for the connection of multiple Gigabit devices (such as GigE Vision camera) and the data transmission speed of each port is up to 1 Gb/s. The module also supports jumbo frame package, link aggregation which conduct exceptional performance for continuously receiving large amount of image data and IEEE 1588 (Precise time synchronization) which achieve synchronization with multiple cameras or powered device (PD) acquisition.
The e-PoE404, which is fully compliant with the 802.3af/802.3at PoE standard, provides up to 30W of PoE power for each port (external 24 VDC is required) and automatically detects to achieve a stable and reliable connection between the powered devices, eliminating the need for power wiring. The module has enhanced PoE protection functions to prevent under-voltage, overvoltage, overcurrent and overheating. It can be programmed not only to turn on and off the PoE power supply, but also to monitor the PoE status and automatically manage the power budget. If there is insufficient power on all PoE ports, the available power will be directed to higher priority ports.
Combining Gigabit bandwidth and PoE capability, the e-PoE404 module is suitable for use as a frame grabber to capture large amount of image data using PoE GigE Vision cameras for machine vision, factory automation and medical imaging applications.
Application
The e-PoE404 module is suitable for the frame grab functions in a wide variety of applications, including:
Specifications
| Software | |
|---|---|
| Utility | PoE Power Management Utility (Voltage, current power monitor, PoE Power On/Off) |
| SDK | Power Management SDK, Windows 10 IoT OS compatible, VC++ dll |
| Bus Interface | |
|---|---|
| Type | e-Busx4 (4.0 GB/s total bandwidth) |
| LED Indicators | |
|---|---|
| Status | 1 x PoE Power, 1 x System Power, 4 x Link Status, 2 x PoE Status |
| PoE Technology | |
|---|---|
| PoE Protectioin | Yes, undervoltage, overvoltage, overcurrent, overheating, and budget overages (Setting by software) |
| PoE Compliance | IEEE802.3af compliance, IEEE802.3at compliance |
| PoE Power | Up to 30 W per port (Total 120 W) |
| PoE Operation | Automatic detection and power management |
| PoE Pin Assignments | B Type V+(4、5)、V- (7、8) |
| PoE Disconnect Mode | DC Disconnect |
| PoE Voltage | +53 VDC |
| Ethernet | |
|---|---|
| Ports | 4 x RJ-45, Intel I211AT Controller, 10/100/1000 Mbps |
| Protocol | IEEE 1588 |
| Jumbo Frame | 9 KB |
| Link Aggregation | Yes |
| Power | |
|---|---|
| Reverse Polarity Protection | Yes |
| Input Range | 24 ~ 52 VDC Input |
| Consumption | 0.15 A @ 24 VDC without PD loading, 6A @ 24VDC with PD full loading (30W per ports) 0.10 A @ 48 VDC without PD loading, 3A @ 48VDC with PD full loading (30W per ports) |
| Mechanical | |
|---|---|
| Dimensions (mm) | 31 x 134 x 136 (W x L x H) |
| Environment | |
|---|---|
| Operating Temperature | -25 ~ +60 °C |
| Storage Temperature | -40 ~ +85 °C |
| Humidity | 10 ~ 90 % RH, non-condensing |
Download
Ordering Information
| e-PoE404 CR | 4-port PoE Ethernet Expansion Module (RoHS) |
