Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gauge, Load Cell)+2 kênh DI + 2 kênh DO ICP DAS ET-7016 CR

Thương hiệu: ICP DAS | Tình trạng: Còn hàng

Liên hệ

Ethernet I/O Module with 2-ch Strain Gauge Input, 2-ch DI and 2-ch DO

THÔNG TIN SẢN PHẨM

Features

Built-in Web Server
Web HMI
Support for both Modbus TCP and Modbus UDP Protocols
Communication Security
Dual Watchdog
Wide Operating Temperature Range: -25 ~ +75°C
I/O Pair Connection
Built-in I/O
- Strain Gauge Input: 2 Channels
- DI/Counter: 2 Channels
- DO: 2 Channels

Introduction

The ET-7016 is a strain gauge module with 2 analog input channels, 1 excitation voltage output channel, 2 digital input channels and 2 digital output channels module. It provides various programmable analog input inputs (+/-1 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, and +/-2.5 V) and supports full-bridge, half-bridge, and quarter-bridge. The range for each analog input is allowed to be configured individually. Excitation voltage output can be in the range of 0 ~ 10 V with a 60 mA driving efficiency. Digital outputs can also be set as alarm outputs. The ET-7016 can also provide long-distance strain gauge measurement that compensates for the loss of voltage resulting from long-distance measurements.

Specification

CPU Module
Watchdog Timer	Yes, Module (0.8 second), Communication (Programmable)

EMS Protection
EFT (IEC 61000-4-4)	±4 kV for Power Line
ESD (IEC 61000-4-2)	±4 kV Contact for Each Terminal ±8 kV Air for Random Point

LED Indicators
Status	1 x Power, 2 x Ethernet

Software
Built-in Web Server	Yes

Digital Input/Counter
Channels	2
Sink/Source (NPN/PNP)	Sink/Source
Contact	Wet Contact
ON Voltage Level	+3.5 VDC ~ +50 VDC
OFF Voltage Level	+1 VDC Max.
Max. Counts	4,294,967,285 (32 bits)
Frequency	100 Hz
Min. Pulse Width	5 ms
Overvoltage Protection	+70 VDC

Digital Output
Channels	2
Type	Isolated Open Collector
Sink/Source (NPN/PNP)	Sink
Load Voltage	+5 VDC ~ +50 VDC
Max. Load Current	700 mA/Channel
Overvoltage Protection	60 VDC
Overload Protection	1.4 A
Short-Circuit Protection	Yes
Power on Value	Yes, Programmable
Safe Value	Yes, Programmable

Strain Gauge Input
Accuracy	±0.05%
Channels	2 (Differential)
Individual Channel Configuration	Yes
Overvoltage Protection	30 VDC
Resolution	16-bit
Sampling Rate	10 Samples/Second (Total)
Sensor Type	±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20mA, 10 ~ 20 mA, 4 ~ 20 mA

Excitation Voltage Output
Channels	1
Range	0 ~ 10 V
Accuracy	±0.05% of FSR
Max. Load Current	60 mA
Drift	±50 ppm/°C
Power on Value	Yes

Ethernet
Ports	10/100 Base-TX with Auto MDI/MDI-X
Security	ID, Password and IP Filter
Protocol	Modbus TCP, Modbus UDP

Power
Reverse Polarity Protection	Yes
Consumption	2.9 W
Powered from Terminal Block	10 ~ 30 VDC

Mechanical
Dimensions (mm)	72 mm x 123 mm x 35 mm (W x L x H)
Installation	DIN-Rail or Wall mounting

Environmental
Operating Temperature	-25 ~ +75°C
Storage Temperature	-30 ~ +80°C
Humidity	10 ~ 90% RH, Non-condensing

Download

Data sheet

Documents

Ordering information

ET-7016 CR

Ethernet I/O Module with 2-ch Strain Gauge Inputs, 2-ch DI and 2-ch DO (RoHS)

Module Ethernet Modbus TCP 2 kênh đầu vào biến dạng (Strain Gauge, Load Cell)+2 kênh DI + 2 kênh DO ICP DAS ET-7016 CR

Sản phẩm đã được thêm vào giỏ hàng

Sản phẩm đã được thêm vào giỏ hàng